Home >> North Carolina >> Kannapolis >> Plumbing Schools


Get Free Info on Plumber Training Kannapolis NC 28025


How to Find the Right Plumbing Training near Kannapolis North Carolina

Kannapolis North Carolina plumber installing sink faucetThe first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Kannapolis NC. But with so many technical schools to select from, just how do you undertake making certain that you enroll in the best one? Especially since there are so many points to evaluate. For example, some potential students will start by searching for schools that are nearby their residence. Once they have found some that are within commuting distance, they will pick the one with the lowest tuition. Although location and cost are significant, they are not the only factors that should be examined. Also important are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and other qualifications should help mold your ultimate decision when choosing a plumbing training school. We will address that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the educational options that are accessible.

What is a Plumber?

Kannapolis North Carolina plumber adjusting water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Kannapolis NC plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Kannapolis NC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Kannapolis NC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Kannapolis NC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Training Schools

Kannapolis North Carolina plumbing contractor repairing water heater

Now that you have made a decision to earn a certificate, diploma or degree, you can start to narrow down your training options. Since there are so many plumbing vocational and trade schools in the Kannapolis NC area, it's imperative to have a checklist of qualifications that each program must satisfy. The first two that we talked about were location and tuition expense. And while both qualifiers may be critical when making your determination, there are additional factors that must be considered as well. Below is a checklist of those additional qualifications that you will need to analyze before choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Make certain that the Kannapolis NC school and program are accredited by a U.S. Department of Education acknowledged accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it can assist in obtaining financial assistance or student loans, which are frequently unavailable for non-accredited programs. Additionally, a number of states mandate that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the North Carolina Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Kannapolis NC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate may indicate that students were disappointed with the program and quit. It might also suggest that the teachers were not qualified to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the field, but also that it has the network of contacts to help students obtain apprenticeships or jobs in the Kannapolis NC area.

Are Apprenticeship Programs Sponsored?  Numerous plumber technical programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Ask if the schools you are considering have referring relationships with local Kannapolis NC plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also provides job opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. If not, ask a local Kannapolis NC plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you can move, the school needs to be within driving distance of your Kannapolis NC residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can monitor some of the classes so that you can observe how big they are and witness first hand the interaction between students and teachers. Speak with some of the students and get their feedback regarding class sizes and instruction. Finally, speak with a few of the instructors and find out what their level of experience is in Kannapolis NC and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to meet your needs. If you can only attend classes in the evening or on weekends near Kannapolis NC, verify that the programs you are looking at provide those choices. If you can only attend on a part-time basis, be sure that the school you select allows part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Find Out More About Kannapolis Plumber Trade Schools

Enroll in the Best Kannapolis Plumbing Training School

Picking the best plumbing training program will undoubtedly be the most critical decision you will make to begin your new profession. As we have addressed in this article, there are many things that you will need to assess and compare between the schools you are considering. It's a prerequisite that any plumber tech school that you are considering includes a considerable amount of hands-on instruction. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom teaching needs to provide a real-world context, and the training program should be up-to-date and conform with industry standards. Courses differ in length and the type of credential provided, so you will have to decide what length of program and degree or certificate will best serve your needs. Each program offers unique possibilities for certification also. Probably the best way to research your final list of schools is to check out each campus and speak with the students and faculty. Invest some time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the school you select is the right one for you. With the proper training, hard work and commitment, you can become a professional plumber in Kannapolis NC.