How to Pick the Right Plumber Vocational School near Monroe North Carolina

The first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Monroe NC. But with numerous technical schools to pick from, just how do you undertake making sure that you enroll in the best one? Especially since there are so many variables to examine. For example, some potential students will begin by searching for schools that are close to their residence. Once they have found a few that are within driving distance, they will select the one with the most affordable tuition. While location and cost are of importance, they are not the sole qualifications that should be evaluated. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should contribute toward your final decision when choosing a plumbing trade school. We will cover that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Monroe NC plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Monroe NC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Monroe NC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Monroe NC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Training Schools

Now that you have made a decision to earn a diploma, certificate or degree, you can start to refine your training options. Considering that there are so many plumbing vocational and trade schools in the Monroe NC area, it's essential to have a checklist of qualifications that each school must meet. The initial two that we talked about were location and the cost of tuition. And while both qualifiers may be important when making your decision, there are other factors that must be taken into account also. Following is a checklist of those added qualifications that you will need to research before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have received either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Monroe NC school is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you obtain a quality education, it may assist in obtaining financial aid or student loans, which are frequently not available for non-accredited programs. Also, a number of states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the North Carolina Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Monroe NC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A low completion rate might indicate that students were dissatisfied with the program and dropped out. It may also indicate that the teachers were not qualified to instruct the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but additionally that it has the network of contacts to help graduates obtain apprenticeships or employment in the Monroe NC area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught along with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are considering have working partnerships with local Monroe NC plumbers or plumbing professionals. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also supplies employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. If not, ask a local Monroe NC plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Monroe NC home. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much personalized training as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how big they are and experience the interaction between instructors and students. Speak to some of the students and get their comments regarding class sizes and instruction. Finally, speak to a few of the teachers and learn what their level of experience is in Monroe NC and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you are only able to attend classes in the evening or on weekends near Monroe NC, verify that the programs you are comparing offer those options. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, ask what the policy is to make-up classes should you miss any due to work, sickness or family responsibilities.

Find Out More About Monroe Plumbing Tech Schools

Enroll in the Right Monroe Plumber Vocational School

Selecting the ideal plumbing trade school will probably be the most important decision you will make to start your new trade. As we have addressed in this article, there are several things that you will need to evaluate and compare among the schools you are reviewing. It's a necessity that any plumbing tech school that you are considering includes a lot of hands-on training. Classes should be smaller in size and every student must have their own equipment to train with. Classroom teaching should provide a real-world context, and the training program should be current and in-line with industry standards. Programs differ in length and the kind of credential provided, so you will need to determine what length of program and certificate or degree will best serve your needs. Every training program offers different possibilities for certification as well. Perhaps the best means to research your final list of schools is to visit each campus and talk with the faculty and students. Invest some time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the program you select is the ideal one for you. With the right training, hard work and dedication, you can become a professional plumber in Monroe NC.