How to Find the Right Plumber Technical School near Shelby North Carolina

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Shelby NC. But with numerous vocational schools to pick from, just how do you tackle making certain that you enroll in the ideal one? Particularly since there are so many variables to evaluate. For example, some prospective students will start by looking for schools that are close to their residence. After they have identified several that are within commuting distance, they will decide on the one with the least expensive tuition. Even though location and cost are of importance, they are not the sole things that must be examined. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifications should influence your ultimate judgment when picking a plumbing trade school. We will address that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the educational options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Shelby NC plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Shelby NC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Shelby NC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Shelby NC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Technical Schools

Once you have decided to earn a diploma, certificate or degree, you can start to refine your school options. Considering that there are so many plumbing vocational and trade schools in the Shelby NC area, it's imperative to have a checklist of qualifications that each school must satisfy. The first two that we talked about were location and the cost of tuition. And although both qualifiers may be important when making your decision, there are other variables that need to be taken into account as well. Following is a checklist of those additional qualifiers that you will need to assess before choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have attained either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Verify that the Shelby NC school is accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain a quality education, it can help in acquiring financial aid or student loans, which are frequently not available for non-accredited schools. Additionally, many states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the North Carolina Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Shelby NC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate may indicate that students were dissatisfied with the program and dropped out. It might also mean that the instructors were not competent to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist grads secure apprenticeships or employment in the Shelby NC area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught in conjunction with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Find out if the schools you are considering have referring partnerships with local Shelby NC plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by furnishing practical training, but it also provides job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. If not, ask a local Shelby NC plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are able to move, the school needs to be within driving distance of your Shelby NC residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and experience the interaction between teachers and students. Talk with several of the students and get their comments regarding class sizes and instruction. Finally, speak with some of the instructors and find out what their level of experience is in Shelby NC and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you can only go to classes in the evening or on weekends near Shelby NC, verify that the programs you are considering offer those options. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Also, ask what the protocol is to make-up classes should you miss any because of work, sickness or family emergencies.

Learn More About Shelby Plumbing Vocational Schools

Pick the Right Shelby Plumber Training School

Picking the ideal plumber trade school will probably be the most important decision you will make to start your new trade. As we have covered in this article, there are a number of things that you will need to examine and compare between the schools you are looking at. It's a necessity that any plumbing training program that you are evaluating includes a good deal of hands-on training. Classes should be small in size and each student must have their personal equipment to train with. Classroom education needs to offer a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Courses differ in duration and the type of credential provided, so you will have to determine what length of program and credential will best satisfy your needs. Every program offers different possibilities for certification also. Perhaps The ideal way to research your short list of schools is to go to each campus and talk with the teachers and students. Take the time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the school you choose is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Shelby NC.