How to Choose the Best Plumbing School near Statesville North Carolina

The initial step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Statesville NC. But with so many technical schools to choose from, just how do you go about making certain that you enroll in the right one? Particularly because there are so many variables to evaluate. For example, some students will begin by looking for schools that are close to their residence. After they have identified a few that are within commuting distance, they will decide on the one with the least expensive tuition. Even though cost and location are of importance, they are not the only things that should be evaluated. Also critical are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifiers should influence your ultimate decision when picking a plumber trade school. We will cover that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the instructional options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Statesville NC plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Statesville NC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Statesville NC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Statesville NC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Trade Schools

When you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Considering that there are numerous plumbing tech and trade schools in the Statesville NC region, it's important to have a checklist of qualifications that each school must satisfy. The first two that we discussed were location and tuition expense. And although both qualifiers may be critical when making your selection, there are additional factors that need to be considered also. Below is a checklist of those added qualifiers that you will need to analyze prior to choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing trade schools have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Confirm that the Statesville NC school is accredited by a U.S. Department of Education recognized accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain a quality education, it may assist in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Additionally, some states mandate that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the North Carolina Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Statesville NC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate may indicate that students were unhappy with the course and dropped out. It may also mean that the instructors were not competent to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist grads obtain apprenticeships or employment in the Statesville NC area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Check if the schools you are comparing have referring partnerships with local Statesville NC plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by providing practical training, but it also supplies job opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. If not, ask a local Statesville NC plumbing contracting company if they can give you some suggestions.

Where is the School Located?  Unless you are able to move, the school must be within driving distance of your Statesville NC home. Take note that if you decide to enroll in an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Talk with several of the students and get their feedback concerning class sizes and instruction. Finally, speak with some of the instructors and learn what their level of experience is in Statesville NC and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Statesville NC, confirm that the schools you are looking at offer those options. If you can only attend on a part-time basis, be sure that the school you select allows part-time enrollment. Also, find out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Get More Info About Statesville Plumber Tech Schools

Choose the Best Statesville Plumbing Trade School

Picking the right plumber training program will undoubtedly be the most important decision you will make to begin your new trade. As we have covered in this article, there are many things that you will need to assess and compare between the schools you are considering. It's a must that any plumbing tech school that you are examining includes a considerable amount of hands-on instruction. Classes should be small in size and every student should have their own equipment to train with. Classroom education needs to provide a real-world perspective, and the training program should be up-to-date and conform with industry standards. Programs differ in duration and the type of credential provided, so you will have to determine what length of program and certificate or degree will best serve your needs. Each program offers different possibilities for certification also. Probably The ideal means to research your final list of schools is to check out each campus and speak with the students and instructors. Invest some time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Statesville NC.