Home >> Ohio >> Athens >> Plumber Training


Request Free Info on Plumbing Schools Athens OH 45701


How to Pick the Best Plumber Tech School near Athens Ohio

Athens Ohio plumbing contractor fixing kitchen sink faucetThe initial step to becoming a plumbing tradesman or contractor is finding a plumbing trade school near Athens OH. But with so many vocational schools to pick from, just how do you undertake making sure that you enroll in the best one? Particularly because there are so many points to consider. For instance, many prospective students will commence by searching for schools that are close to their residence. Once they have located several that are within commuting range, they will select the one with the cheapest tuition. While location and cost are of importance, they are not the only qualifications that should be evaluated. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and other qualifications should contribute toward your final judgment when picking a plumbing training school. We will address that checklist in more detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Athens Ohio plumber fixing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Athens OH plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Athens OH plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Athens OH is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Athens OH to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Vocational Schools

Athens Ohio plumber installing water heater

Now that you have decided to obtain a diploma, certificate or degree, you can start to focus your school options. Considering that there are so many plumbing vocational and trade schools in the Athens OH region, it's imperative to have a checklist of criteria that each school must satisfy. The first 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be critical when making your decision, there are additional variables that need to be considered as well. Below is a checklist of those added qualifiers that you will need to assess before selecting a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Verify that the Athens OH program and school are accredited by a U.S. Department of Education acknowledged accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire a superior education, it may help in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Additionally, some states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Ohio Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Athens OH schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate could signify that students were unhappy with the program and quit. It might also indicate that the teachers were not qualified to instruct the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the field, but additionally that it has the network of contacts to assist students obtain apprenticeships or employment in the Athens OH area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught together with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Find out if the schools you are comparing have working partnerships with local Athens OH plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by providing practical training, but it also provides employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. If not, ask a local Athens OH plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school must be within driving distance of your Athens OH residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can observe how big they are and experience the interaction between instructors and students. Talk with several of the students and get their feedback concerning class sizes and instruction. Last, talk to some of the instructors and learn what their level of experience is in Athens OH and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are assessing are flexible enough to fulfill your needs. If you are only able to go to classes in the evening or on weekends near Athens OH, verify that the schools you are comparing offer those options. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, sickness or family issues.

Find Out More About Athens Plumber Trade Schools

Choose the Right Athens Plumbing Training School

Selecting the ideal plumber trade school will probably be the most critical decision you will make to start your new profession. As we have discussed in this article, there are several things that you will need to examine and compare between the schools you are looking at. It's a must that any plumbing tech school that you are reviewing includes a lot of hands-on training. Classes need to be small in size and every student must have their personal equipment to train with. Classroom instruction should offer a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Programs vary in length and the type of credential offered, so you will need to decide what length of program and degree or certificate will best fulfill your needs. Every training program provides unique possibilities for certification as well. Probably the best way to research your final list of schools is to go to each campus and talk with the students and instructors. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the program you pick is the best one for you. With the right training, hard work and dedication, you can become a professional plumber in Athens OH.