How to Pick the Right Plumbing Vocational School near Jenks Oklahoma

The first step to becoming a plumbing contractor or tradesman is finding a plumbing trade school near Jenks OK. But with numerous technical schools to pick from, just how do you tackle making sure that you enroll in the ideal one? Especially because there are a number of points to examine. For example, many prospective students will commence by searching for schools that are close to their residence. When they have found some that are within commuting range, they will select the one with the lowest tuition. Although location and cost are of importance, they are not the only qualifications that should be considered. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should influence your ultimate decision when selecting a plumbing training school. We will talk about that checklist in greater detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Jenks OK plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Jenks OK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Jenks OK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Jenks OK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Tech Schools

Now that you have decided to earn a diploma, certificate or degree, you can start to narrow down your training options. Since there are numerous plumbing trade and vocational schools in the Jenks OK area, it's imperative to have a checklist of qualifications that each program must meet. The initial two that we mentioned were location and the cost of tuition. And while both qualifiers may be critical when making your decision, there are other variables that must be considered as well. Below is a checklist of those added qualifications that you will need to assess prior to enrolling in a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have received either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Confirm that the Jenks OK school is accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a quality education, it can help in acquiring financial assistance or student loans, which are in many cases not available for non-accredited schools. Furthermore, a number of states mandate that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Oklahoma Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Jenks OK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate could signify that students were disappointed with the course and dropped out. It might also signify that the teachers were not qualified to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist graduates secure apprenticeships or jobs in the Jenks OK area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught along with an apprenticeship or an internship program. Those participating vocational and trade programs will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Find out if the schools you are considering have referring partnerships with local Jenks OK plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local Jenks OK plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you are willing to relocate, the school must be within driving distance of your Jenks OK residence. Take note that if you decide to attend an out-of-state school, in addition to moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be challenging in larger classes. Ask if you can monitor some of the classes so that you can see how big they are and experience the interaction between instructors and students. Talk to some of the students and get their comments regarding class sizes and instruction. Last, talk with a few of the teachers and learn what their level of experience is in Jenks OK and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are assessing are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Jenks OK, confirm that the schools you are considering provide those choices. If you can only attend part-time, make sure that the school you select permits part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Jenks Plumbing Training Schools

Enroll in the Right Jenks Plumbing Trade School

Picking the best plumber trade school will probably be the most important decision you will make to launch your new career. As we have discussed in this article, there are a number of things that you will need to assess and compare among the schools you are reviewing. It's a prerequisite that any plumber training that you are reviewing includes a considerable amount of hands-on training. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom instruction needs to provide a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Courses differ in length and the type of credential provided, so you will have to determine what length of program and credential will best satisfy your needs. Each training program provides different possibilities for certification also. Perhaps The ideal way to research your final list of schools is to go to each campus and talk with the faculty and students. Take the time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the school you decide on is the ideal one for you. With the right training, hard work and commitment, you can become a professional plumber in Jenks OK.