How to Find the Right Plumber Course near Lawton Oklahoma

The first step to becoming a plumbing contractor or tradesman is finding a plumbing trade school near Lawton OK. But with numerous vocational schools to select from, just how do you undertake making sure that you enroll in the ideal one? Especially since there are a number of factors to evaluate. For example, many prospective students will start by looking for schools that are close to their residence. When they have identified several that are within driving distance, they will pick the one with the lowest tuition. While cost and location are significant, they are not the sole qualifications that must be examined. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifiers should influence your final decision when choosing a plumbing trade school. We will discuss that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the educational choices that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Lawton OK plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Lawton OK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Lawton OK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Lawton OK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Trade Schools

Once you have made a decision to obtain a certificate, diploma or degree, you can start to focus your school options. Because there are numerous plumbing vocational and trade schools in the Lawton OK region, it's imperative to have a checklist of criteria that each school must meet. The first 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be important when making your determination, there are additional factors that need to be taken into account as well. Below is a checklist of those added qualifiers that you will need to assess prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing trade programs have earned either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Lawton OK school is accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire an excellent education, it may assist in obtaining financial assistance or student loans, which are often not available for non-accredited schools. Also, some states require that the plumbing training course be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Oklahoma Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Lawton OK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A lower completion rate could indicate that students were disappointed with the program and dropped out. It may also mean that the teachers were not qualified to instruct the students. It's also essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the industry, but also that it has the network of contacts to help grads acquire apprenticeships or employment in the Lawton OK area.

Are Apprenticeship Programs Sponsored?  Most plumber trade programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are considering have referring partnerships with local Lawton OK plumbers or plumbing professionals. An apprenticeship not only offers a valuable experience by furnishing practical training, but it also supplies job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. If not, ask a local Lawton OK plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school must be within commuting distance of your Lawton OK home. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Speak with some of the students and get their opinions concerning class sizes and instruction. Last, speak to some of the teachers and find out what their level of experience is in Lawton OK and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Lawton OK, verify that the schools you are considering offer those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, ask what the policy is to make-up classes should you miss any because of work, sickness or family issues.

Get More Info About Lawton Plumber Training Schools

Choose the Best Lawton Plumber Trade School

Selecting the best plumbing trade school will probably be the most critical decision you will make to begin your new career. As we have discussed in this article, there are several things that you will need to assess and compare between the training programs you are considering. It's a must that any plumbing training program that you are examining includes a considerable amount of hands-on training. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction should offer a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Programs vary in duration and the type of credential offered, so you will have to determine what length of program and certificate or degree will best fulfill your needs. Each training program provides unique options for certification also. Perhaps the best way to research your short list of schools is to visit each campus and speak with the teachers and students. Take the time to monitor some classes. Tour the campus and facilities. Make sure that you are confident that the school you choose is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Lawton OK.