Home >> Oklahoma >> Sapulpa >> Becoming A Plumber


Request Free Info on Plumber Trade Schools Sapulpa OK 74039


How to Choose the Best Plumber Training School near Sapulpa Oklahoma

Sapulpa Oklahoma plumbing contractor repairing kitchen sink faucetThe first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Sapulpa OK. But with numerous technical schools to select from, just how do you tackle making certain that you enroll in the right one? Especially since there are so many points to examine. For instance, some potential students will commence by looking for schools that are nearby their residence. When they have located a few that are within driving range, they will select the one with the lowest tuition. Even though location and cost are of importance, they are not the only factors that must be examined. Also critical are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifiers should contribute toward your final decision when choosing a plumbing trade school. We will address that checklist in greater detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Sapulpa Oklahoma plumber adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Sapulpa OK plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Sapulpa OK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Sapulpa OK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Sapulpa OK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Trade Schools

Sapulpa Oklahoma plumber installing hot water heater

When you have made a decision to earn a certificate, diploma or degree, you can begin to refine your training options. Since there are so many plumbing trade and vocational schools in the Sapulpa OK area, it's essential to have a checklist of qualifications that each school must satisfy. The initial 2 that we discussed were location and tuition expense. And while both qualifiers may be crucial when making your decision, there are additional factors that must be considered as well. Following is a checklist of those additional qualifiers that you will need to analyze before choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Verify that the Sapulpa OK program and school are accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive an excellent education, it can assist in obtaining financial aid or student loans, which are often not available for non-accredited schools. Additionally, many states mandate that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Oklahoma Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Sapulpa OK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate could indicate that students were unhappy with the program and quit. It could also mean that the instructors were not competent to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but additionally that it has the network of contacts to assist grads secure apprenticeships or employment in the Sapulpa OK area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Check if the schools you are comparing have working relationships with local Sapulpa OK plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also provides job opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are up-to-date and what you will be working with on the job. If you are already in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. Otherwise, ask a local Sapulpa OK plumbing contractor if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Sapulpa OK residence. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how large they are and witness first hand the interaction between instructors and students. Talk with several of the students and get their feedback relating to class sizes and instruction. Finally, speak to some of the instructors and learn what their level of experience is in Sapulpa OK and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Sapulpa OK, check that the schools you are comparing provide those options. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Additionally, check out what the protocol is to make-up classes should you miss any because of work, illness or family issues.

Find Out More About Sapulpa Plumber Trade Schools

Enroll in the Best Sapulpa Plumber Vocational School

Selecting the best plumber trade school will undoubtedly be the most critical decision you will make to launch your new career. As we have addressed in this article, there are many factors that you will need to examine and compare among the schools you are reviewing. It's a necessity that any plumber training program that you are reviewing includes a good deal of hands-on training. Classes should be smaller in size and each student must have their personal equipment to train with. Classroom teaching needs to provide a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Programs vary in length and the kind of credential offered, so you will need to decide what length of program and degree or certificate will best fulfill your needs. Every training program offers different possibilities for certification also. Probably the best approach to research your final list of schools is to check out each campus and talk with the faculty and students. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you pick is the ideal one for you. With the proper training, hard work and dedication, you can become a professional plumber in Sapulpa OK.