Home >> Oregon >> Redmond >> Plumber Training


Request Free Info on Plumber Training Classes Redmond OR 97756


How to Choose the Best Plumbing Tech School near Redmond Oregon

Redmond Oregon plumbing contractor installing kitchen sink faucetThe initial step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near Redmond OR. But with so many vocational schools to select from, just how do you tackle making sure that you enroll in the ideal one? Particularly since there are so many points to examine. For example, some prospective students will begin by searching for schools that are nearby their residence. Once they have found a few that are within driving distance, they will pick the one with the most affordable tuition. Even though location and cost are of importance, they are not the only things that need to be considered. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and other qualifications should help mold your final decision when choosing a plumbing training school. We will discuss that checklist in more detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the training choices that are offered.

Becoming a Plumber

Redmond Oregon plumber adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Redmond OR plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Redmond OR plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Redmond OR is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Redmond OR to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Training Schools

Redmond Oregon plumbing contractor replacing water heater

When you have decided to earn a certificate, diploma or degree, you can begin to narrow down your school options. Because there are numerous plumbing trade and vocational schools in the Redmond OR region, it's essential to have a checklist of criteria that each program must meet. The first 2 that we discussed were location and tuition expense. And while both qualifiers may be crucial when making your selection, there are additional factors that need to be considered also. Below is a checklist of those additional qualifiers that you will need to research prior to choosing a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical programs have attained either a regional or a national accreditation. They may earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Make certain that the Redmond OR school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive a quality education, it may help in securing financial aid or student loans, which are often unavailable for non-accredited schools. Also, a number of states require that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Oregon Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Redmond OR schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A lower completion rate might signify that students were unhappy with the course and quit. It may also suggest that the teachers were not qualified to instruct the students. It's also essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the industry, but also that it has the network of contacts to assist grads obtain apprenticeships or jobs in the Redmond OR area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Ask if the schools you are considering have referring relationships with local Redmond OR plumbers or plumbing contractors. An apprenticeship not only provides a rewarding experience by providing practical training, but it also furnishes employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. If not, ask a local Redmond OR plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Redmond OR residence. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and experience the interaction between students and instructors. Speak with a few of the students and get their opinions regarding class sizes and instruction. Last, speak to a few of the teachers and learn what their level of experience is in Redmond OR and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Redmond OR, check that the schools you are comparing offer those choices. If you can only attend part-time, make sure that the school you select offers part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any due to work, sickness or family issues.

Find Out More About Redmond Plumbing Tech Schools

Enroll in the Best Redmond Plumber Trade School

Picking the right plumbing trade school will undoubtedly be the most important decision you will make to begin your new trade. As we have addressed in this article, there are a number of things that you will need to evaluate and compare among the schools you are looking at. It's a must that any plumber tech school that you are considering includes a good deal of hands-on training. Classes should be small in size and each student should have their own equipment to train with. Classroom education should offer a real-world context, and the training program should be current and conform with industry standards. Courses differ in duration and the type of credential offered, so you will have to decide what length of program and credential will best fulfill your needs. Each program offers different possibilities for certification as well. Perhaps the best approach to research your short list of schools is to go to each campus and talk with the students and instructors. Take the time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you decide on is the best one for you. With the proper training, effort and dedication, you can become a professional plumber in Redmond OR.