How to Choose the Right Plumbing Vocational School near Redmond Oregon

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Redmond OR. But with numerous vocational schools to pick from, just how do you undertake making sure that you enroll in the best one? Particularly because there are so many points to examine. For example, many students will start by looking for schools that are nearby their residence. After they have found some that are within commuting range, they will pick the one with the lowest tuition. While cost and location are important, they are not the only things that should be considered. Also important are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and other qualifiers should help mold your final decision when selecting a plumbing training school. We will cover that checklist in more detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Redmond OR plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Redmond OR plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Redmond OR is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Redmond OR to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Tech Schools

When you have made a decision to obtain a diploma, certificate or degree, you can start to focus your training options. Since there are so many plumbing vocational and trade schools in the Redmond OR region, it's imperative to have a checklist of criteria that each program must satisfy. The first two that we mentioned were location and tuition expense. And although both qualifiers may be crucial when making your decision, there are additional variables that must be taken into account as well. Following is a checklist of those additional qualifiers that you will need to assess before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Verify that the Redmond OR program and school are accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you get a superior education, it can assist in securing financial aid or student loans, which are often unavailable for non-accredited schools. Additionally, some states mandate that the plumbing training program be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Oregon Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Redmond OR schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate may suggest that students were dissatisfied with the program and dropped out. It might also signify that the instructors were not competent to instruct the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to help grads secure apprenticeships or jobs in the Redmond OR area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught together with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Ask if the schools you are comparing have referring partnerships with local Redmond OR plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also furnishes job opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Redmond OR plumbing company if they can provide some tips.

Where is the School Located?  Unless you are able to relocate, the school must be within commuting distance of your Redmond OR residence. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in bigger classes. Ask if you can monitor a couple of the classes so that you can see how large they are and experience the interaction between students and instructors. Speak to several of the students and get their opinions regarding class sizes and instruction. Last, speak with some of the instructors and find out what their level of experience is in Redmond OR and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you can only attend classes at night or on weekends near Redmond OR, verify that the schools you are comparing offer those options. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Finally, find out what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Learn More About Redmond Plumbing Vocational Schools

Pick the Right Redmond Plumbing Trade School

Choosing the best plumbing trade school will probably be the most important decision you will make to start your new career. As we have covered in this article, there are several things that you will need to examine and compare among the schools you are considering. It's a must that any plumbing training that you are assessing includes a good deal of hands-on instruction. Classes should be small in size and each student should have their own equipment to train with. Classroom instruction needs to offer a real-world perspective, and the course of study should be current and in-line with industry standards. Training programs differ in duration and the type of credential provided, so you will need to determine what length of program and certificate or degree will best satisfy your needs. Each program offers unique possibilities for certification as well. Perhaps The ideal means to research your short list of schools is to go to each campus and talk with the teachers and students. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the program you select is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Redmond OR.