How to Pick the Right Plumbing Training Course near Redmond Oregon

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Redmond OR. But with so many vocational schools to choose from, just how do you go about making certain that you enroll in the best one? Especially since there are so many variables to evaluate. For instance, some prospective students will start by searching for schools that are close to their home. After they have located several that are within driving range, they will decide on the one with the lowest tuition. Even though cost and location are important, they are not the sole qualifications that should be evaluated. Also important are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifiers should contribute toward your ultimate judgment when picking a plumber trade school. We will talk about that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the training options that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Redmond OR plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Redmond OR plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Redmond OR is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Redmond OR to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Vocational Schools

Now that you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Since there are so many plumbing tech and trade schools in the Redmond OR region, it's imperative to have a checklist of criteria that each school must satisfy. The initial 2 that we mentioned were location and tuition expense. And although both qualifiers may be crucial when making your determination, there are additional factors that need to be considered as well. Below is a checklist of those additional qualifications that you will need to analyze prior to choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Make sure that the Redmond OR program is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you get an excellent education, it may help in acquiring financial aid or student loans, which are frequently unavailable for non-accredited schools. Furthermore, some states require that the plumbing training program be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Oregon Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Redmond OR schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate could indicate that students were dissatisfied with the course and quit. It may also indicate that the teachers were not qualified to train the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but additionally that it has the network of contacts to help graduates obtain apprenticeships or employment in the Redmond OR area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught together with an apprenticeship or an internship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Find out if the schools you are reviewing have working partnerships with local Redmond OR plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by providing hands-on training, but it also supplies job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Redmond OR plumbing contracting company if they can provide some suggestions.

Where is the School Located?  Unless you are willing to move, the school must be within driving distance of your Redmond OR residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Speak with a few of the students and get their comments relating to class sizes and instruction. Last, talk to some of the teachers and find out what their level of experience is in Redmond OR and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Redmond OR, confirm that the programs you are looking at offer those choices. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, illness or family issues.

Get More Info About Redmond Plumbing Tech Schools

Pick the Best Redmond Plumbing Vocational School

Choosing the best plumber training program will probably be the most critical decision you will make to launch your new career. As we have covered in this article, there are a number of things that you will need to evaluate and compare among the training programs you are looking at. It's a prerequisite that any plumber training that you are evaluating includes a good deal of hands-on training. Classes should be small in size and every student should have their own equipment to train with. Classroom education needs to offer a real-world context, and the training program should be up-to-date and in-line with industry standards. Programs vary in duration and the type of credential provided, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Every training program offers different options for certification also. Perhaps the best way to research your short list of schools is to check out each campus and talk with the teachers and students. Take the time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you choose is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Redmond OR.