How to Select the Right Plumber Trade School near Rapid City South Dakota

The initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Rapid City SD. But with so many vocational schools to select from, just how do you tackle making sure that you enroll in the right one? Especially because there are a number of points to examine. For instance, many prospective students will begin by looking for schools that are close to their home. When they have identified some that are within driving distance, they will decide on the one with the cheapest tuition. While location and cost are important, they are not the only things that need to be evaluated. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should help mold your ultimate decision when selecting a plumber training school. We will talk about that checklist in more detail later in this post. But first, let's talk a little bit about becoming a plumber and the educational options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Rapid City SD plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Rapid City SD plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Rapid City SD is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Rapid City SD to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Trade Schools

Now that you have made a decision to obtain a diploma, certificate or degree, you can begin to refine your school options. Considering that there are numerous plumbing trade and vocational schools in the Rapid City SD area, it's imperative to have a checklist of criteria that each program must satisfy. The first 2 that we discussed were location and the cost of tuition. And even though both qualifiers may be critical when making your decision, there are other variables that need to be taken into account as well. Below is a checklist of those additional qualifiers that you will need to assess prior to selecting a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have acquired either a regional or a national accreditation. They can attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Verify that the Rapid City SD program and school are accredited by a U.S. Department of Education recognized accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you acquire a superior education, it may help in acquiring financial assistance or student loans, which are often unavailable for non-accredited schools. Furthermore, a number of states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the South Dakota Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Rapid City SD schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A low completion rate may indicate that students were dissatisfied with the course and quit. It might also indicate that the teachers were not qualified to instruct the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the field, but additionally that it has the network of contacts to help grads obtain apprenticeships or jobs in the Rapid City SD area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are considering have referring partnerships with local Rapid City SD plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also provides employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. If not, ask a local Rapid City SD plumbing contractor if they can give you some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Rapid City SD residence. Remember that if you decide to attend an out-of-state school, in addition to moving costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and teachers. Talk with some of the students and get their opinions regarding class sizes and instruction. Last, speak with some of the teachers and learn what their level of experience is in Rapid City SD and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you are only able to go to classes in the evening or on weekends near Rapid City SD, verify that the programs you are looking at offer those choices. If you can only attend part-time, make sure that the school you select offers part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Get More Info About Rapid City Plumber Trade Schools

Choose the Right Rapid City Plumbing Training School

Selecting the right plumber trade school will undoubtedly be the most critical decision you will make to begin your new career. As we have discussed in this article, there are many things that you will need to evaluate and compare between the schools you are looking at. It's a prerequisite that any plumbing training that you are evaluating includes a lot of hands-on training. Classes need to be small in size and every student must have their personal equipment to train with. Classroom education should offer a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Programs differ in duration and the type of credential offered, so you will have to decide what length of program and credential will best fulfill your needs. Every training program offers different possibilities for certification also. Probably the best way to research your final list of schools is to visit each campus and talk with the students and faculty. Take the time to sit in on a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you pick is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Rapid City SD.