Home >> South Dakota >> Watertown >> Plumbing Classes


Get Free Info on Plumbing Training Schools Watertown SD 57201


How to Choose the Right Plumbing Training School near Watertown South Dakota

Watertown South Dakota plumbing contractor replacing kitchen faucetThe first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Watertown SD. But with numerous vocational schools to choose from, just how do you approach making certain that you enroll in the ideal one? Especially because there are a number of points to consider. For example, many potential students will start by searching for schools that are nearby their residence. Once they have found a few that are within commuting distance, they will select the one with the most affordable tuition. While location and cost are significant, they are not the only factors that need to be considered. Also important are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and other qualifiers should contribute toward your final decision when selecting a plumbing training school. We will address that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the educational options that are available.

What is a Plumber?

Watertown South Dakota plumber fixing water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Watertown SD plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Watertown SD plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Watertown SD is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Watertown SD to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Training Schools

Watertown South Dakota plumber repairing hot water heater

Once you have decided to obtain a diploma, certificate or degree, you can start to narrow down your school options. Since there are so many plumbing tech and trade schools in the Watertown SD region, it's essential to have a checklist of qualifications that each program must satisfy. The initial two that we mentioned were location and the cost of tuition. And even though both qualifiers may be crucial when making your determination, there are additional variables that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to research prior to selecting a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have received either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Confirm that the Watertown SD program is accredited by a U.S. Department of Education recognized accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you get a quality education, it can help in acquiring financial assistance or student loans, which are often not available for non-accredited programs. Additionally, some states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the South Dakota Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Watertown SD schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A lower completion rate might indicate that students were dissatisfied with the program and quit. It could also signify that the instructors were not competent to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to help graduates acquire apprenticeships or employment in the Watertown SD area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Ask if the schools you are considering have working partnerships with local Watertown SD plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also furnishes job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with on the job. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be expecting. If not, ask a local Watertown SD plumbing contracting company if they can give you some suggestions.

Where is the School Located?  Unless you can move, the school needs to be within driving distance of your Watertown SD home. Take note that if you decide to attend an out-of-state school, besides the added moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Speak to a few of the students and get their comments regarding class sizes and instruction. Last, talk to a few of the teachers and find out what their level of experience is in Watertown SD and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you are only able to go to classes at night or on weekends near Watertown SD, check that the programs you are comparing provide those options. If you can only attend on a part-time basis, be sure that the school you select permits part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any due to work, sickness or family responsibilities.

Get More Info About Watertown Plumber Vocational Schools

Enroll in the Best Watertown Plumber Training School

Choosing the ideal plumbing trade school will probably be the most critical decision you will make to begin your new profession. As we have addressed in this article, there are a number of things that you will need to evaluate and compare between the schools you are reviewing. It's a prerequisite that any plumbing tech school that you are assessing includes a considerable amount of hands-on instruction. Classes should be small in size and every student must have their own equipment to train with. Classroom education should offer a real-world context, and the training program should be up-to-date and conform with industry standards. Programs differ in duration and the kind of credential provided, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Every training program offers different options for certification also. Perhaps the best approach to research your short list of schools is to check out each campus and talk with the students and faculty. Take the time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you select is the best one for you. With the right training, effort and commitment, you can become a professional plumber in Watertown SD.