How to Choose the Best Plumber Tech School near Johnson City Tennessee

The first step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Johnson City TN. But with so many technical schools to choose from, just how do you approach making certain that you enroll in the right one? Especially since there are a number of points to examine. For instance, many potential students will start by looking for schools that are close to their residence. After they have located several that are within commuting distance, they will decide on the one with the cheapest tuition. While location and cost are important, they are not the sole qualifications that need to be examined. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifications should help mold your ultimate decision when selecting a plumber training school. We will address that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Johnson City TN plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Johnson City TN plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Johnson City TN is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Johnson City TN to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Training Schools

Once you have made a decision to earn a certificate, diploma or degree, you can start to refine your school options. Because there are numerous plumbing vocational and trade schools in the Johnson City TN region, it's imperative to have a checklist of criteria that each school must meet. The initial two that we talked about were location and tuition expense. And even though both qualifiers may be crucial when making your decision, there are other variables that must be taken into account as well. Below is a checklist of those additional qualifications that you will need to assess prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing trade programs have attained either a regional or a national accreditation. They may receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make sure that the Johnson City TN program and school are accredited by a U.S. Department of Education recognized accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you get a quality education, it may help in acquiring financial aid or student loans, which are in many cases unavailable for non-accredited schools. Furthermore, some states mandate that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Tennessee Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Johnson City TN schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A low completion rate may indicate that students were unhappy with the program and quit. It might also signify that the teachers were not qualified to instruct the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to assist graduates acquire apprenticeships or employment in the Johnson City TN area.

Are Apprenticeship Programs Sponsored?  Most plumber vocational programs are taught along with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Find out if the schools you are considering have referring partnerships with local Johnson City TN plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also provides job opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. Otherwise, ask a local Johnson City TN plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school needs to be within driving distance of your Johnson City TN home. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized training as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can observe how big they are and experience the interaction between students and instructors. Speak to a few of the students and get their comments concerning class sizes and instruction. Last, speak to some of the teachers and find out what their level of experience is in Johnson City TN and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Johnson City TN, confirm that the programs you are looking at offer those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Also, ask what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Learn More About Johnson City Plumbing Trade Schools

Choose the Best Johnson City Plumbing Trade School

Picking the ideal plumbing training program will undoubtedly be the most important decision you will make to start your new profession. As we have covered in this article, there are many factors that you will need to examine and compare among the schools you are considering. It's a necessity that any plumbing tech school that you are assessing includes a good deal of hands-on training. Classes should be small in size and every student must have their own equipment to train with. Classroom education needs to offer a real-world frame of reference, and the course of study should be current and in-line with industry standards. Training programs differ in length and the kind of credential provided, so you will need to decide what length of program and credential will best fulfill your needs. Every training program offers unique options for certification also. Probably The ideal means to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the school you decide on is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Johnson City TN.