Home >> Texas >> Austin >> Plumbing Schools


Get Free Info on Plumber Trade Schools Austin TX 73301


How to Enroll in the Right Plumber Training Course near Austin Texas

Austin Texas plumber replacing kitchen sink faucetThe first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Austin TX. But with so many technical schools to pick from, just how do you approach making certain that you enroll in the best one? Especially since there are a number of factors to evaluate. For example, many potential students will commence by searching for schools that are close to their home. Once they have identified some that are within driving range, they will select the one with the lowest tuition. Even though cost and location are of importance, they are not the sole factors that must be examined. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and other qualifiers should help mold your ultimate decision when selecting a plumber trade school. We will talk about that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional options that are offered.

What is a Plumber?

Austin Texas plumber repairing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Austin TX plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Austin TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Austin TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Austin TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Vocational Schools

Austin Texas plumber repairing hot water heater

Now that you have decided to earn a diploma, certificate or degree, you can begin to focus your training options. Because there are so many plumbing tech and trade schools in the Austin TX area, it's essential to have a checklist of qualifications that each school must meet. The first 2 that we talked about were location and tuition expense. And even though both qualifiers may be crucial when making your decision, there are additional variables that must be considered also. Following is a checklist of those additional qualifiers that you will need to assess before choosing a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have received either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Make certain that the Austin TX school is accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a quality education, it can assist in securing financial aid or student loans, which are frequently not available for non-accredited schools. Furthermore, some states require that the plumbing training course be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Austin TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate may indicate that students were disappointed with the course and quit. It could also mean that the instructors were not qualified to instruct the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the trade, but also that it has the network of contacts to help students acquire apprenticeships or employment in the Austin TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber trade programs are taught along with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Ask if the schools you are comparing have referring relationships with local Austin TX plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides job opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be looking for. If not, ask a local Austin TX plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you are able to move, the school must be within commuting distance of your Austin TX home. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can see how large they are and experience the interaction between students and teachers. Speak with a few of the students and get their feedback relating to class sizes and instruction. Finally, talk to a few of the teachers and find out what their level of experience is in Austin TX and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Austin TX, check that the programs you are reviewing provide those choices. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Finally, ask what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About Austin Plumbing Vocational Schools

Choose the Right Austin Plumbing Vocational School

Choosing the best plumbing trade school will probably be the most critical decision you will make to start your new career. As we have discussed in this article, there are many things that you will need to assess and compare among the schools you are considering. It's a necessity that any plumber training program that you are evaluating includes a lot of hands-on instruction. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom instruction should offer a real-world context, and the course of study should be current and in-line with industry standards. Programs vary in duration and the kind of credential offered, so you will need to decide what length of program and credential will best satisfy your needs. Every program offers different options for certification also. Perhaps The ideal approach to research your short list of schools is to visit each campus and speak with the students and instructors. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you pick is the right one for you. With the right training, effort and dedication, you can become a professional plumber in Austin TX.