How to Enroll in the Best Plumbing Vocational School near Corpus Christi Texas

The initial step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Corpus Christi TX. But with so many vocational schools to select from, just how do you undertake making sure that you enroll in the best one? Particularly because there are a number of points to consider. For instance, many prospective students will start by searching for schools that are nearby their home. After they have found several that are within driving range, they will pick the one with the lowest tuition. Even though location and cost are important, they are not the sole qualifications that must be considered. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and other qualifiers should help mold your ultimate decision when picking a plumbing trade school. We will discuss that checklist in more detail later in this article. But first, let's review a little bit about becoming a plumber and the instructional options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Corpus Christi TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Corpus Christi TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Corpus Christi TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Corpus Christi TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Trade Schools

Now that you have decided to obtain a certificate, diploma or degree, you can start to narrow down your school options. Since there are so many plumbing trade and vocational schools in the Corpus Christi TX region, it's essential to have a checklist of criteria that each program must meet. The first two that we discussed were location and tuition expense. And although both qualifiers may be important when making your decision, there are other variables that must be taken into account as well. Following is a checklist of those added qualifiers that you will need to assess prior to enrolling in a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing technical programs have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Verify that the Corpus Christi TX program is accredited by a U.S. Department of Education approved accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it can assist in obtaining financial assistance or student loans, which are frequently unavailable for non-accredited schools. Additionally, many states mandate that the plumbing training program be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Texas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Corpus Christi TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate may suggest that students were unhappy with the course and quit. It could also signify that the instructors were not qualified to instruct the students. It's similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the industry, but also that it has the network of contacts to help students secure apprenticeships or employment in the Corpus Christi TX area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught together with an apprenticeship or an internship program. Those participating vocational and trade schools will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are reviewing have referring partnerships with local Corpus Christi TX plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by supplying practical training, but it also supplies job opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. Otherwise, ask a local Corpus Christi TX plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to relocate, the school must be within commuting distance of your Corpus Christi TX home. Take note that if you decide to enroll in an out-of-state school, in addition to relocation costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and teachers. Talk to several of the students and get their opinions regarding class sizes and instruction. Finally, speak to some of the instructors and find out what their level of experience is in Corpus Christi TX and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Corpus Christi TX, verify that the programs you are looking at provide those options. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Corpus Christi Plumber Training Schools

Choose the Best Corpus Christi Plumber Trade School

Choosing the best plumber trade school will undoubtedly be the most critical decision you will make to start your new career. As we have discussed in this article, there are a number of things that you will need to evaluate and compare among the training programs you are looking at. It's a prerequisite that any plumbing training that you are reviewing includes a lot of hands-on training. Classes need to be small in size and every student must have their personal equipment to train with. Classroom teaching needs to provide a real-world context, and the course of study should be up-to-date and in-line with industry standards. Training programs differ in length and the type of credential offered, so you will need to ascertain what length of program and degree or certificate will best fulfill your needs. Each program offers unique possibilities for certification as well. Probably the best way to research your final list of schools is to visit each campus and talk with the students and faculty. Invest some time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the training program you decide on is the best one for you. With the proper training, effort and dedication, you can become a professional plumber in Corpus Christi TX.