How to Pick the Right Plumber Trade School near Eagle Pass Texas

The initial step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Eagle Pass TX. But with numerous technical schools to choose from, just how do you tackle making sure that you enroll in the ideal one? Especially because there are a number of points to consider. For example, many potential students will start by looking for schools that are nearby their home. Once they have identified a few that are within driving distance, they will decide on the one with the most affordable tuition. While cost and location are significant, they are not the sole qualifications that must be examined. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and additional qualifications should influence your final decision when picking a plumbing training school. We will talk about that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the training choices that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Eagle Pass TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Eagle Pass TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Eagle Pass TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Eagle Pass TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Vocational Schools

Now that you have made a decision to earn a diploma, certificate or degree, you can start to refine your school options. Since there are so many plumbing trade and vocational schools in the Eagle Pass TX area, it's imperative to have a checklist of criteria that each program must meet. The first two that we talked about were location and the cost of tuition. And while both qualifiers may be critical when making your determination, there are other factors that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to assess prior to selecting a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have received either a regional or a national accreditation. They can attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Verify that the Eagle Pass TX school and program are accredited by a U.S. Department of Education recognized accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive a superior education, it may assist in obtaining financial assistance or student loans, which are often unavailable for non-accredited schools. Furthermore, a number of states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Texas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Eagle Pass TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate could signify that students were dissatisfied with the program and dropped out. It could also indicate that the instructors were not competent to train the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist graduates obtain apprenticeships or employment in the Eagle Pass TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are comparing have referring partnerships with local Eagle Pass TX plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by providing practical training, but it also supplies employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Eagle Pass TX plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Eagle Pass TX home. Take note that if you decide to enroll in an out-of-state school, besides the added relocation costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can observe how big they are and experience the interaction between students and instructors. Talk to several of the students and get their opinions relating to class sizes and instruction. Last, talk to a few of the instructors and find out what their level of experience is in Eagle Pass TX and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Eagle Pass TX, confirm that the programs you are considering provide those choices. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any due to work, illness or family responsibilities.

Learn More About Eagle Pass Plumbing Trade Schools

Pick the Best Eagle Pass Plumbing Training School

Picking the ideal plumber training program will undoubtedly be the most important decision you will make to launch your new trade. As we have discussed in this article, there are a number of things that you will need to assess and compare among the training programs you are considering. It's a necessity that any plumbing tech school that you are examining includes a good deal of hands-on training. Classes need to be smaller in size and each student should have their personal equipment to train with. Classroom instruction should offer a real-world perspective, and the course of study should be current and conform with industry standards. Courses vary in length and the type of credential provided, so you will have to determine what length of program and credential will best serve your needs. Each program offers different options for certification as well. Perhaps the best way to research your short list of schools is to go to each campus and speak with the students and faculty. Take the time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the school you choose is the best one for you. With the right training, effort and commitment, you can become a professional plumber in Eagle Pass TX.