How to Enroll in the Best Plumbing Vocational School near Flower Mound Texas

The initial step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Flower Mound TX. But with so many vocational schools to choose from, just how do you undertake making sure that you enroll in the best one? Especially since there are so many factors to consider. For instance, some students will start by searching for schools that are close to their home. Once they have found several that are within driving distance, they will choose the one with the lowest tuition. Although cost and location are important, they are not the sole factors that need to be evaluated. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and additional qualifiers should influence your final decision when picking a plumbing trade school. We will talk about that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the instructional options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Flower Mound TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Flower Mound TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Flower Mound TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Flower Mound TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Training Schools

Now that you have decided to obtain a diploma, certificate or degree, you can start to refine your school options. Because there are numerous plumbing vocational and trade schools in the Flower Mound TX area, it's imperative to have a checklist of criteria that each school must meet. The initial 2 that we talked about were location and the cost of tuition. And even though both qualifiers may be important when making your decision, there are additional variables that must be considered as well. Below is a checklist of those added qualifications that you will need to research prior to selecting a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Verify that the Flower Mound TX program and school are accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. Along with helping guarantee that you get a quality education, it can assist in obtaining financial aid or student loans, which are often unavailable for non-accredited schools. Additionally, a number of states mandate that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Flower Mound TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate may suggest that students were unhappy with the program and quit. It could also suggest that the instructors were not qualified to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which can produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but also that it has the network of contacts to help students secure apprenticeships or jobs in the Flower Mound TX area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Find out if the schools you are considering have working partnerships with local Flower Mound TX plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also provides employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are already in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. If not, ask a local Flower Mound TX plumbing company if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school must be within commuting distance of your Flower Mound TX home. Take note that if you decide to enroll in an out-of-state school, in addition to moving costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much individualized instruction as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and experience the interaction between instructors and students. Speak with some of the students and get their feedback relating to class sizes and instruction. Finally, speak to a few of the teachers and find out what their level of experience is in Flower Mound TX and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Flower Mound TX, confirm that the programs you are reviewing offer those options. If you can only attend part-time, make sure that the school you select permits part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Flower Mound Plumbing Vocational Schools

Pick the Right Flower Mound Plumber Vocational School

Picking the right plumbing trade school will probably be the most critical decision you will make to launch your new trade. As we have discussed in this article, there are many factors that you will need to evaluate and compare among the schools you are reviewing. It's a must that any plumber training that you are considering includes a good deal of hands-on instruction. Classes should be small in size and each student must have their personal equipment to train with. Classroom teaching needs to offer a real-world context, and the course of study should be current and conform with industry standards. Courses vary in length and the kind of credential provided, so you will have to ascertain what length of program and credential will best serve your needs. Each program offers different options for certification also. Perhaps the best means to research your short list of schools is to check out each campus and speak with the students and instructors. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the ideal one for you. With the proper training, hard work and dedication, you can become a professional plumber in Flower Mound TX.