Home >> Texas >> Fort Hood >> Plumber Trades Schools


Request Free Info on Plumber Training Schools Fort Hood TX 76544


How to Find the Best Plumber Training near Fort Hood Texas

Fort Hood Texas plumber repairing sink faucetThe first step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Fort Hood TX. But with numerous vocational schools to pick from, just how do you undertake making sure that you enroll in the right one? Particularly because there are so many factors to consider. For example, some students will start by searching for schools that are close to their home. After they have located some that are within commuting range, they will pick the one with the most affordable tuition. While location and cost are important, they are not the only things that need to be examined. Also important are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and additional qualifiers should contribute toward your final decision when choosing a plumber training school. We will discuss that checklist in greater detail later in this article. But first, let's talk a little bit about becoming a plumber and the training choices that are available.

What is a Plumber?

Fort Hood Texas plumbing contractor fixing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Fort Hood TX plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Fort Hood TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Fort Hood TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Fort Hood TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Training Schools

Fort Hood Texas plumber installing hot water heater

When you have made a decision to obtain a diploma, certificate or degree, you can begin to focus your training options. Because there are so many plumbing trade and vocational schools in the Fort Hood TX region, it's essential to have a checklist of qualifications that each school must meet. The initial two that we talked about were location and the cost of tuition. And even though both qualifiers may be critical when making your determination, there are additional factors that need to be taken into account as well. Below is a checklist of those additional qualifiers that you will need to analyze before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Verify that the Fort Hood TX program is accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain an excellent education, it can assist in securing financial aid or student loans, which are often unavailable for non-accredited schools. Also, many states require that the plumbing training course be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Fort Hood TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate could suggest that students were dissatisfied with the course and quit. It could also suggest that the teachers were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to assist grads acquire apprenticeships or employment in the Fort Hood TX area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught along with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Find out if the schools you are reviewing have working partnerships with local Fort Hood TX plumbers or plumbing contractors. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also provides job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be trained on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. If not, ask a local Fort Hood TX plumbing contracting company if they can provide some suggestions.

Where is the School Located?  Unless you are willing to move, the school must be within driving distance of your Fort Hood TX residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor a few of the classes so that you can observe how large they are and experience the interaction between teachers and students. Talk with several of the students and get their feedback concerning class sizes and instruction. Last, speak to some of the teachers and find out what their level of experience is in Fort Hood TX and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you are only able to attend classes in the evening or on weekends near Fort Hood TX, verify that the programs you are reviewing offer those options. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Finally, check out what the protocol is to make-up classes should you miss any because of work, illness or family issues.

Get More Info About Fort Hood Plumber Vocational Schools

Choose the Best Fort Hood Plumbing Trade School

Choosing the best plumber training program will probably be the most critical decision you will make to launch your new profession. As we have addressed in this article, there are many things that you will need to evaluate and compare between the training programs you are considering. It's a necessity that any plumber training that you are examining includes a considerable amount of hands-on training. Classes need to be small in size and every student must have their personal equipment to train with. Classroom teaching needs to provide a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Training programs differ in duration and the type of credential provided, so you will need to ascertain what length of program and degree or certificate will best satisfy your needs. Every program provides unique options for certification as well. Probably The ideal way to research your short list of schools is to visit each campus and talk with the students and faculty. Take the time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the program you choose is the best one for you. With the right training, hard work and commitment, you can become a professional plumber in Fort Hood TX.