How to Enroll in the Best Plumbing Technical School near Garland Texas

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Garland TX. But with so many vocational schools to select from, just how do you undertake making certain that you enroll in the right one? Especially because there are so many points to examine. For instance, many prospective students will start by looking for schools that are nearby their home. After they have located a few that are within driving range, they will pick the one with the least expensive tuition. Although location and cost are of importance, they are not the only factors that need to be examined. Also critical are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and additional qualifiers should help mold your final decision when picking a plumber training school. We will address that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Garland TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Garland TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Garland TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Garland TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Vocational Schools

Once you have made a decision to earn a diploma, certificate or degree, you can begin to refine your training options. Considering that there are numerous plumbing tech and trade schools in the Garland TX region, it's essential to have a checklist of qualifications that each school must satisfy. The first 2 that we discussed were location and tuition expense. And even though both qualifiers may be critical when making your determination, there are additional variables that must be considered also. Below is a checklist of those additional qualifications that you will need to analyze before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have attained either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Make sure that the Garland TX school is accredited by a U.S. Department of Education approved accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive an excellent education, it can assist in acquiring financial assistance or student loans, which are frequently unavailable for non-accredited schools. Also, some states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Garland TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate may signify that students were unhappy with the course and dropped out. It might also signify that the teachers were not competent to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the field, but also that it has the network of contacts to help students secure apprenticeships or jobs in the Garland TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Check if the schools you are considering have referring relationships with local Garland TX plumbers or plumbing contractors. An apprenticeship not only provides a rewarding experience by furnishing hands-on training, but it also supplies job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be trained on are up-to-date and what you will be working with on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be looking for. Otherwise, ask a local Garland TX plumbing company if they can provide some suggestions.

Where is the School Located?  Unless you are able to move, the school needs to be within driving distance of your Garland TX residence. Take note that if you decide to enroll in an out-of-state school, in addition to relocation costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Talk to several of the students and get their comments concerning class sizes and instruction. Finally, talk to some of the instructors and find out what their level of experience is in Garland TX and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only attend classes in the evening or on weekends near Garland TX, check that the programs you are reviewing offer those options. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Additionally, find out what the policy is to make-up classes should you miss any because of work, illness or family issues.

Find Out More About Garland Plumbing Trade Schools

Choose the Best Garland Plumbing Training School

Choosing the right plumbing training program will probably be the most important decision you will make to begin your new career. As we have discussed in this article, there are many things that you will need to assess and compare among the training programs you are considering. It's a necessity that any plumber tech school that you are examining includes a good deal of hands-on training. Classes should be small in size and each student should have their personal equipment to train with. Classroom instruction needs to provide a real-world context, and the course of study should be up-to-date and in-line with industry standards. Training programs differ in length and the kind of credential provided, so you will have to determine what length of program and credential will best fulfill your needs. Every training program provides unique options for certification also. Probably the best means to research your final list of schools is to visit each campus and talk with the students and instructors. Take the time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the program you pick is the ideal one for you. With the right training, effort and commitment, you can become a professional plumber in Garland TX.