How to Choose the Best Plumber Tech School near Haltom City Texas

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Haltom City TX. But with numerous technical schools to choose from, just how do you tackle making sure that you enroll in the right one? Particularly since there are so many points to examine. For instance, some potential students will commence by searching for schools that are close to their residence. Once they have located several that are within driving distance, they will pick the one with the lowest tuition. While cost and location are significant, they are not the sole qualifications that need to be considered. Also critical are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and additional qualifiers should help mold your ultimate decision when choosing a plumber trade school. We will cover that checklist in greater detail later in this article. But first, let's talk a little bit about becoming a plumber and the training options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Haltom City TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Haltom City TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Haltom City TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Haltom City TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Trade Schools

Once you have decided to obtain a certificate, diploma or degree, you can begin to focus your training options. Because there are numerous plumbing tech and trade schools in the Haltom City TX area, it's important to have a checklist of criteria that each program must meet. The first 2 that we discussed were location and the cost of tuition. And even though both qualifiers may be important when making your selection, there are additional variables that must be taken into account as well. Below is a checklist of those additional qualifications that you will need to research prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing trade schools have received either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Verify that the Haltom City TX program and school are accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping guarantee that you obtain a quality education, it may help in securing financial assistance or student loans, which are frequently not available for non-accredited programs. Also, some states mandate that the plumbing training program be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Haltom City TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate may signify that students were dissatisfied with the program and quit. It could also suggest that the instructors were not qualified to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but additionally that it has the network of contacts to help graduates secure apprenticeships or employment in the Haltom City TX area.

Are Apprenticeship Programs Sponsored?  Numerous plumber technical programs are taught along with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Check if the schools you are considering have referring partnerships with local Haltom City TX plumbers or plumbing professionals. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also provides job opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. If not, ask a local Haltom City TX plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school must be within driving distance of your Haltom City TX residence. Remember that if you decide to attend an out-of-state school, in addition to moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can monitor a few of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk to some of the students and get their feedback relating to class sizes and instruction. Last, speak with a few of the teachers and find out what their level of experience is in Haltom City TX and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you can only go to classes in the evening or on weekends near Haltom City TX, check that the programs you are reviewing offer those options. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Finally, check out what the protocol is to make-up classes should you miss any due to work, sickness or family responsibilities.

Find Out More About Haltom City Plumbing Training Schools

Pick the Best Haltom City Plumbing Training School

Picking the ideal plumbing trade school will probably be the most important decision you will make to start your new career. As we have discussed in this article, there are many things that you will need to examine and compare between the training programs you are reviewing. It's a prerequisite that any plumbing tech school that you are examining includes a considerable amount of hands-on instruction. Classes need to be small in size and each student should have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the curriculum should be current and conform with industry standards. Training programs differ in length and the kind of credential provided, so you will need to decide what length of program and credential will best serve your needs. Every program provides unique possibilities for certification as well. Perhaps The ideal way to research your short list of schools is to check out each campus and speak with the teachers and students. Invest some time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the school you decide on is the ideal one for you. With the right training, hard work and commitment, you can become a professional plumber in Haltom City TX.