How to Select the Right Plumber Training School near Houston Texas

The first step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Houston TX. But with so many vocational schools to choose from, just how do you approach making sure that you enroll in the best one? Especially because there are a number of variables to evaluate. For example, some prospective students will begin by looking for schools that are nearby their residence. Once they have located some that are within driving range, they will choose the one with the most affordable tuition. While cost and location are significant, they are not the only qualifications that should be considered. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifiers should influence your final judgment when selecting a plumber trade school. We will address that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Houston TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Houston TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Houston TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Houston TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Trade Schools

When you have made a decision to earn a diploma, certificate or degree, you can begin to narrow down your school options. Considering that there are so many plumbing tech and trade schools in the Houston TX region, it's imperative to have a checklist of qualifications that each program must satisfy. The initial 2 that we mentioned were location and the cost of tuition. And even though both qualifiers may be critical when making your determination, there are additional variables that must be considered as well. Following is a checklist of those added qualifications that you will need to analyze before selecting a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have earned either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Confirm that the Houston TX school is accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. Along with helping ensure that you acquire a superior education, it can assist in acquiring financial assistance or student loans, which are often unavailable for non-accredited schools. Additionally, many states mandate that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Texas Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Houston TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A lower completion rate could indicate that students were disappointed with the program and dropped out. It might also indicate that the instructors were not competent to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the industry, but also that it has the network of contacts to help graduates obtain apprenticeships or jobs in the Houston TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught along with an apprenticeship or an internship program. Those participating vocational and trade schools will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Check if the schools you are comparing have working partnerships with local Houston TX plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by providing hands-on training, but it also furnishes job opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. Otherwise, ask a local Houston TX plumbing company if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Houston TX residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and experience the interaction between students and teachers. Speak to several of the students and get their opinions regarding class sizes and instruction. Finally, speak with some of the instructors and learn what their level of experience is in Houston TX and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are assessing are flexible enough to meet your needs. If you are only able to go to classes at night or on weekends near Houston TX, check that the programs you are considering provide those options. If you can only attend on a part-time basis, make certain that the school you select offers part-time enrollment. Finally, ask what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Learn More About Houston Plumbing Vocational Schools

Choose the Best Houston Plumber Training School

Selecting the right plumbing training program will probably be the most important decision you will make to begin your new profession. As we have discussed in this article, there are many factors that you will need to evaluate and compare between the training programs you are considering. It's a prerequisite that any plumber tech school that you are assessing includes a considerable amount of hands-on instruction. Classes need to be small in size and each student should have their own equipment to train with. Classroom instruction should offer a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs differ in length and the kind of credential provided, so you will need to decide what length of program and credential will best satisfy your needs. Every program provides different options for certification also. Probably The ideal means to research your final list of schools is to go to each campus and talk with the students and faculty. Take the time to attend some classes. Inspect the campus and facilities. Make certain that you are confident that the training program you select is the best one for you. With the proper training, hard work and dedication, you can become a professional plumber in Houston TX.