How to Choose the Right Plumber Training School near Irving Texas

The initial step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Irving TX. But with so many vocational schools to pick from, just how do you go about making sure that you enroll in the right one? Particularly since there are so many factors to evaluate. For example, some prospective students will start by searching for schools that are nearby their home. When they have located some that are within driving range, they will decide on the one with the cheapest tuition. Although location and cost are significant, they are not the only things that must be evaluated. Also important are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifications should influence your ultimate decision when choosing a plumber trade school. We will address that checklist in greater detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the training choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Irving TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Irving TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Irving TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Irving TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Training Schools

Now that you have made a decision to obtain a diploma, certificate or degree, you can begin to narrow down your school options. Since there are so many plumbing tech and trade schools in the Irving TX region, it's important to have a checklist of criteria that each school must meet. The first two that we talked about were location and tuition expense. And while both qualifiers may be important when making your selection, there are additional variables that must be considered as well. Following is a checklist of those additional qualifications that you will need to research before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have attained either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Make sure that the Irving TX school is accredited by a U.S. Department of Education recognized accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it may assist in securing financial assistance or student loans, which are frequently unavailable for non-accredited programs. Furthermore, some states mandate that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Texas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Irving TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate could indicate that students were disappointed with the course and dropped out. It could also signify that the instructors were not competent to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the field, but also that it has the network of contacts to assist graduates acquire apprenticeships or jobs in the Irving TX area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught along with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Ask if the schools you are reviewing have referring partnerships with local Irving TX plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also provides employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Irving TX plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your Irving TX home. Take note that if you decide to attend an out-of-state school, in addition to moving costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized training as possible, which can be difficult in bigger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and experience the interaction between instructors and students. Talk with a few of the students and get their comments relating to class sizes and instruction. Last, talk to some of the teachers and find out what their level of experience is in Irving TX and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only attend classes in the evening or on weekends near Irving TX, check that the programs you are reviewing provide those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any because of work, sickness or family issues.

Learn More About Irving Plumbing Trade Schools

Choose the Right Irving Plumbing Training School

Picking the best plumbing trade school will undoubtedly be the most important decision you will make to begin your new career. As we have addressed in this article, there are many things that you will need to examine and compare between the schools you are looking at. It's a prerequisite that any plumber tech school that you are considering includes a good deal of hands-on instruction. Classes should be small in size and each student should have their personal equipment to train with. Classroom education needs to offer a real-world perspective, and the curriculum should be current and conform with industry standards. Programs vary in length and the type of credential offered, so you will need to ascertain what length of program and credential will best fulfill your needs. Every program offers different possibilities for certification as well. Probably The ideal approach to research your final list of schools is to visit each campus and speak with the students and faculty. Take the time to monitor some classes. Tour the campus and facilities. Make sure that you are confident that the program you select is the right one for you. With the proper training, effort and dedication, you can become a professional plumber in Irving TX.