How to Pick the Best Plumber Trade School near Rowlett Texas

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Rowlett TX. But with numerous technical schools to choose from, just how do you go about making sure that you enroll in the right one? Especially because there are so many variables to consider. For instance, some prospective students will begin by searching for schools that are close to their home. When they have found some that are within driving distance, they will decide on the one with the most affordable tuition. While location and cost are important, they are not the only things that should be evaluated. Also critical are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifications should influence your final decision when choosing a plumbing training school. We will cover that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the training choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Rowlett TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Rowlett TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Rowlett TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Rowlett TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Trade Schools

Once you have made a decision to earn a certificate, diploma or degree, you can begin to focus your school options. Because there are so many plumbing tech and trade schools in the Rowlett TX area, it's imperative to have a checklist of qualifications that each program must meet. The first two that we mentioned were location and tuition expense. And although both qualifiers may be important when making your selection, there are additional factors that must be considered as well. Following is a checklist of those added qualifications that you will need to analyze before selecting a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing technical schools have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Confirm that the Rowlett TX school is accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain an excellent education, it can assist in obtaining financial aid or student loans, which are often unavailable for non-accredited schools. Additionally, a number of states mandate that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Rowlett TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A lower completion rate could indicate that students were disappointed with the course and dropped out. It may also suggest that the instructors were not competent to train the students. It's similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the industry, but also that it has the network of contacts to help grads acquire apprenticeships or employment in the Rowlett TX area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught along with an apprenticeship or an internship program. Those participating trade and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Find out if the schools you are reviewing have referring partnerships with local Rowlett TX plumbers or plumbing specialists. An apprenticeship not only offers a valuable experience by furnishing practical training, but it also provides employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be expecting. If not, ask a local Rowlett TX plumbing company if they can provide some pointers.

Where is the School Located?  Unless you can move, the school must be within driving distance of your Rowlett TX residence. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk to several of the students and get their feedback relating to class sizes and instruction. Last, talk with a few of the teachers and find out what their level of experience is in Rowlett TX and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Rowlett TX, confirm that the schools you are looking at provide those choices. If you can only attend on a part-time basis, be sure that the school you select offers part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any because of work, illness or family issues.

Learn More About Rowlett Plumber Tech Schools

Choose the Right Rowlett Plumbing Training School

Choosing the right plumbing training program will probably be the most important decision you will make to begin your new profession. As we have covered in this article, there are a number of things that you will need to evaluate and compare between the schools you are reviewing. It's a necessity that any plumber tech school that you are evaluating includes a good deal of hands-on training. Classes need to be small in size and each student should have their own equipment to train with. Classroom education should offer a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Courses vary in length and the kind of credential offered, so you will need to ascertain what length of program and degree or certificate will best fulfill your needs. Each program provides different possibilities for certification as well. Probably the best approach to research your final list of schools is to visit each campus and speak with the students and instructors. Take the time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the program you choose is the ideal one for you. With the proper training, effort and dedication, you can become a professional plumber in Rowlett TX.