How to Select the Right Plumber Trade School near San Juan Texas

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near San Juan TX. But with numerous vocational schools to select from, just how do you tackle making sure that you enroll in the ideal one? Particularly because there are a number of variables to consider. For example, some students will start by searching for schools that are close to their home. After they have found a few that are within commuting range, they will select the one with the cheapest tuition. While location and cost are important, they are not the only qualifications that should be examined. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifications should contribute toward your final judgment when picking a plumber trade school. We will address that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the training options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local San Juan TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of San Juan TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in San Juan TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near San Juan TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Trade Schools

Once you have decided to obtain a diploma, certificate or degree, you can start to focus your school options. Since there are numerous plumbing tech and trade schools in the San Juan TX region, it's essential to have a checklist of criteria that each school must meet. The initial 2 that we mentioned were location and the cost of tuition. And even though both qualifiers may be critical when making your determination, there are other variables that must be considered as well. Below is a checklist of those added qualifications that you will need to analyze before choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational programs have attained either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Verify that the San Juan TX school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping make certain that you receive a superior education, it may assist in obtaining financial aid or student loans, which are frequently unavailable for non-accredited programs. Also, many states mandate that the plumbing training course be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Texas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of San Juan TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A low completion rate could suggest that students were disappointed with the program and dropped out. It may also suggest that the instructors were not qualified to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to assist grads obtain apprenticeships or employment in the San Juan TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Check if the schools you are considering have working partnerships with local San Juan TX plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by providing hands-on training, but it also provides job opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. If not, ask a local San Juan TX plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your San Juan TX residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on some of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Speak to some of the students and get their comments relating to class sizes and instruction. Last, talk with a few of the teachers and learn what their level of experience is in San Juan TX and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you are only able to go to classes at night or on weekends near San Juan TX, verify that the programs you are looking at offer those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Find Out More About San Juan Plumber Vocational Schools

Choose the Right San Juan Plumber Trade School

Picking the best plumber training program will probably be the most important decision you will make to begin your new career. As we have covered in this article, there are a number of things that you will need to assess and compare among the training programs you are looking at. It's a necessity that any plumbing training that you are considering includes a lot of hands-on training. Classes should be small in size and every student must have their personal equipment to train with. Classroom instruction needs to offer a real-world context, and the course of study should be current and conform with industry standards. Training programs vary in duration and the type of credential offered, so you will have to ascertain what length of program and degree or certificate will best serve your needs. Each program provides unique possibilities for certification also. Probably the best approach to research your short list of schools is to check out each campus and speak with the students and instructors. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you choose is the ideal one for you. With the right training, hard work and dedication, you can become a professional plumber in San Juan TX.