How to Enroll in the Right Plumbing Tech School near Ogden Utah

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Ogden UT. But with so many technical schools to select from, just how do you undertake making sure that you enroll in the right one? Especially because there are a number of points to consider. For example, some potential students will begin by looking for schools that are nearby their home. When they have found a few that are within commuting distance, they will select the one with the least expensive tuition. Although location and cost are of importance, they are not the only things that need to be evaluated. Also important are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifications should contribute toward your ultimate judgment when picking a plumber trade school. We will address that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Ogden UT plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Ogden UT plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Ogden UT is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Ogden UT to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Tech Schools

When you have made a decision to obtain a diploma, certificate or degree, you can start to refine your training options. Since there are so many plumbing tech and trade schools in the Ogden UT area, it's essential to have a checklist of qualifications that each school must satisfy. The initial two that we discussed were location and tuition expense. And although both qualifiers may be critical when making your determination, there are other variables that need to be taken into account as well. Following is a checklist of those additional qualifications that you will need to analyze before choosing a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Ogden UT school is accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire an excellent education, it can help in obtaining financial aid or student loans, which are frequently not available for non-accredited programs. Additionally, some states mandate that the plumbing training program be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Utah Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Ogden UT schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A low completion rate might indicate that students were unhappy with the program and dropped out. It could also signify that the instructors were not competent to instruct the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist grads secure apprenticeships or employment in the Ogden UT area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught together with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are comparing have referring relationships with local Ogden UT plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also supplies employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be expecting. If not, ask a local Ogden UT plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Ogden UT home. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized training as possible, which can be difficult in larger classes. Ask if you can monitor a few of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Talk with some of the students and get their opinions concerning class sizes and instruction. Last, speak to a few of the teachers and learn what their level of experience is in Ogden UT and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Ogden UT, verify that the schools you are looking at provide those choices. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, sickness or family responsibilities.

Find Out More About Ogden Plumbing Trade Schools

Enroll in the Best Ogden Plumbing Training School

Picking the ideal plumbing trade school will undoubtedly be the most critical decision you will make to start your new profession. As we have discussed in this article, there are several factors that you will need to assess and compare among the schools you are reviewing. It's a necessity that any plumbing training that you are assessing includes a considerable amount of hands-on instruction. Classes need to be smaller in size and every student must have their own equipment to train with. Classroom instruction needs to offer a real-world context, and the course of study should be up-to-date and in-line with industry standards. Courses vary in length and the type of credential provided, so you will need to determine what length of program and credential will best fulfill your needs. Each program provides unique possibilities for certification as well. Probably the best way to research your final list of schools is to visit each campus and talk with the students and instructors. Invest some time to sit in on some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you decide on is the best one for you. With the proper training, hard work and dedication, you can become a professional plumber in Ogden UT.