How to Select the Best Plumber Training School near Provo Utah

The initial step to becoming a plumbing contractor or tradesman is finding a plumbing trade school near Provo UT. But with numerous vocational schools to select from, just how do you approach making sure that you enroll in the right one? Particularly because there are so many factors to examine. For instance, some potential students will start by looking for schools that are close to their residence. Once they have found a few that are within commuting distance, they will pick the one with the least expensive tuition. Even though location and cost are important, they are not the sole qualifications that must be evaluated. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should contribute toward your ultimate decision when choosing a plumber trade school. We will address that checklist in more detail later in this article. But first, let's review a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Provo UT plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Provo UT plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Provo UT is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Provo UT to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Tech Schools

Once you have decided to earn a diploma, certificate or degree, you can start to narrow down your training options. Considering that there are numerous plumbing tech and trade schools in the Provo UT area, it's important to have a checklist of qualifications that each school must satisfy. The first 2 that we discussed were location and tuition expense. And although both qualifiers may be critical when making your selection, there are other variables that must be taken into account also. Following is a checklist of those added qualifiers that you will need to research prior to selecting a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have acquired either a regional or a national accreditation. They may earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Verify that the Provo UT program and school are accredited by a U.S. Department of Education recognized accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain a quality education, it can assist in acquiring financial assistance or student loans, which are frequently not available for non-accredited programs. Additionally, a number of states require that the plumbing training program be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Utah Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Provo UT schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate could indicate that students were dissatisfied with the program and dropped out. It may also indicate that the teachers were not competent to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the industry, but additionally that it has the network of contacts to help graduates acquire apprenticeships or jobs in the Provo UT area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught together with an apprenticeship or an internship program. Those participating vocational and trade programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Ask if the schools you are comparing have working partnerships with local Provo UT plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies job opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be looking for. Otherwise, ask a local Provo UT plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Provo UT residence. Take note that if you decide to enroll in an out-of-state school, besides the added relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be challenging in bigger classes. Ask if you can monitor a few of the classes so that you can see how big they are and experience the interaction between students and instructors. Talk to several of the students and get their opinions regarding class sizes and instruction. Last, talk with a few of the teachers and learn what their level of experience is in Provo UT and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you are only able to go to classes in the evening or on weekends near Provo UT, check that the schools you are looking at offer those options. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, illness or family issues.

Get More Info About Provo Plumbing Tech Schools

Pick the Right Provo Plumber Trade School

Selecting the ideal plumbing training program will probably be the most critical decision you will make to launch your new profession. As we have covered in this article, there are several factors that you will need to evaluate and compare among the schools you are considering. It's a prerequisite that any plumbing tech school that you are assessing includes a lot of hands-on instruction. Classes should be small in size and every student must have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Training programs vary in duration and the type of credential provided, so you will need to ascertain what length of program and credential will best satisfy your needs. Each training program provides different options for certification as well. Perhaps the best means to research your final list of schools is to check out each campus and speak with the teachers and students. Take the time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the school you select is the right one for you. With the right training, hard work and dedication, you can become a professional plumber in Provo UT.