How to Pick the Right Plumber Trade School near Washington Utah

The initial step to becoming a plumbing contractor or tradesman is enrolling in a plumbing trade school near Washington UT. But with numerous vocational schools to choose from, just how do you go about making certain that you enroll in the ideal one? Particularly since there are so many factors to evaluate. For example, many students will begin by searching for schools that are nearby their home. Once they have located some that are within driving range, they will choose the one with the most affordable tuition. While cost and location are important, they are not the only factors that need to be examined. Also critical are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifiers should influence your final decision when choosing a plumber training school. We will talk about that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the training choices that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Washington UT plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Washington UT plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Washington UT is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Washington UT to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Tech Schools

Once you have decided to obtain a certificate, diploma or degree, you can start to narrow down your school options. Considering that there are so many plumbing tech and trade schools in the Washington UT area, it's essential to have a checklist of qualifications that each program must meet. The first 2 that we talked about were location and the cost of tuition. And although both qualifiers may be critical when making your determination, there are additional variables that need to be considered also. Below is a checklist of those additional qualifications that you will need to analyze before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Make sure that the Washington UT program is accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a superior education, it can assist in acquiring financial aid or student loans, which are frequently unavailable for non-accredited schools. Also, a number of states mandate that the plumbing training program be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Utah Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Washington UT schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A low completion rate may indicate that students were disappointed with the program and quit. It might also mean that the instructors were not competent to instruct the students. It's also essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but also that it has the network of contacts to assist graduates obtain apprenticeships or employment in the Washington UT area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught together with an apprenticeship or an internship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Find out if the schools you are reviewing have referring relationships with local Washington UT plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by supplying practical training, but it also supplies employment opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Washington UT plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within driving distance of your Washington UT home. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in bigger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and experience the interaction between students and teachers. Speak to some of the students and get their opinions regarding class sizes and instruction. Last, speak with a few of the instructors and find out what their level of experience is in Washington UT and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you are only able to go to classes in the evening or on weekends near Washington UT, confirm that the schools you are looking at provide those options. If you can only attend on a part-time basis, be sure that the school you select permits part-time enrollment. Additionally, find out what the policy is to make-up classes should you miss any because of work, sickness or family issues.

Find Out More About Washington Plumbing Vocational Schools

Enroll in the Best Washington Plumbing Trade School

Selecting the best plumber training program will probably be the most important decision you will make to start your new career. As we have discussed in this article, there are many things that you will need to examine and compare between the training programs you are looking at. It's a necessity that any plumber training that you are considering includes a good deal of hands-on instruction. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom instruction should provide a real-world context, and the course of study should be current and conform with industry standards. Courses differ in length and the kind of credential offered, so you will have to ascertain what length of program and degree or certificate will best serve your needs. Every training program offers different options for certification as well. Probably the best approach to research your short list of schools is to go to each campus and speak with the students and instructors. Invest some time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the school you decide on is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Washington UT.