How to Enroll in the Right Plumber Course near Auburn Washington

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Auburn WA. But with so many vocational schools to select from, just how do you undertake making sure that you enroll in the right one? Particularly because there are so many points to consider. For instance, some prospective students will begin by looking for schools that are close to their home. When they have identified some that are within commuting range, they will pick the one with the lowest tuition. Even though cost and location are of importance, they are not the only factors that should be examined. Also critical are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and other qualifiers should help mold your ultimate decision when selecting a plumber trade school. We will talk about that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Auburn WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Auburn WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Auburn WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Auburn WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Vocational Schools

Once you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Because there are numerous plumbing trade and vocational schools in the Auburn WA area, it's essential to have a checklist of qualifications that each program must meet. The first 2 that we mentioned were location and the cost of tuition. And although both qualifiers may be critical when making your selection, there are other factors that must be considered also. Below is a checklist of those added qualifications that you will need to analyze prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have acquired either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Confirm that the Auburn WA school and program are accredited by a U.S. Department of Education acknowledged accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you get an excellent education, it may help in obtaining financial aid or student loans, which are in many cases not available for non-accredited programs. Also, a number of states require that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Auburn WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate could suggest that students were dissatisfied with the course and dropped out. It may also mean that the teachers were not competent to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist grads obtain apprenticeships or jobs in the Auburn WA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber trade programs are taught together with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Ask if the schools you are reviewing have working partnerships with local Auburn WA plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also furnishes job opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be trained on are up-to-date and what you will be using in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Auburn WA plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Auburn WA residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Talk with several of the students and get their feedback concerning class sizes and instruction. Last, talk with a few of the instructors and learn what their level of experience is in Auburn WA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you can only go to classes in the evening or on weekends near Auburn WA, confirm that the programs you are looking at offer those options. If you can only attend on a part-time basis, make certain that the school you select allows part-time enrollment. Finally, find out what the policy is to make-up classes should you miss any due to work, sickness or family issues.

Learn More About Auburn Plumber Tech Schools

Choose the Right Auburn Plumbing Training School

Selecting the ideal plumbing trade school will undoubtedly be the most important decision you will make to launch your new profession. As we have covered in this article, there are several factors that you will need to evaluate and compare among the training programs you are looking at. It's a prerequisite that any plumber training program that you are assessing includes a good deal of hands-on instruction. Classes should be smaller in size and each student should have their personal equipment to train with. Classroom instruction should offer a real-world context, and the training program should be up-to-date and conform with industry standards. Courses vary in duration and the type of credential provided, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Each program provides different possibilities for certification as well. Perhaps the best way to research your final list of schools is to go to each campus and speak with the students and faculty. Take the time to sit in on a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you pick is the right one for you. With the right training, hard work and dedication, you can become a professional plumber in Auburn WA.