How to Select the Best Plumber Trade School near Bothell Washington

The first step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Bothell WA. But with numerous technical schools to pick from, just how do you undertake making certain that you enroll in the best one? Especially since there are so many variables to evaluate. For instance, many potential students will commence by searching for schools that are close to their home. Once they have located a few that are within commuting range, they will decide on the one with the lowest tuition. Although cost and location are significant, they are not the only factors that need to be considered. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should influence your final decision when picking a plumbing training school. We will talk about that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Bothell WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Bothell WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Bothell WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Bothell WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Trade Schools

When you have decided to earn a diploma, certificate or degree, you can start to refine your training options. Considering that there are numerous plumbing vocational and trade schools in the Bothell WA area, it's important to have a checklist of criteria that each school must satisfy. The first two that we talked about were location and the cost of tuition. And even though both qualifiers may be important when making your determination, there are other variables that need to be considered as well. Below is a checklist of those additional qualifiers that you will need to analyze before choosing a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have earned either a regional or a national accreditation. They may earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Make sure that the Bothell WA school is accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a superior education, it can assist in obtaining financial aid or student loans, which are in many cases unavailable for non-accredited programs. Furthermore, many states mandate that the plumbing training program be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Washington Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Bothell WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate could signify that students were unhappy with the course and dropped out. It could also indicate that the instructors were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the industry, but additionally that it has the network of contacts to assist graduates secure apprenticeships or employment in the Bothell WA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught together with an internship or an apprenticeship program. Those participating vocational and trade schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Check if the schools you are comparing have working relationships with local Bothell WA plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also supplies employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be working with in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Bothell WA plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Bothell WA residence. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and experience the interaction between students and instructors. Speak with several of the students and get their opinions relating to class sizes and instruction. Finally, speak with some of the teachers and find out what their level of experience is in Bothell WA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you are only able to attend classes at night or on weekends near Bothell WA, verify that the schools you are looking at offer those options. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Also, ask what the protocol is to make-up classes should you miss any because of work, sickness or family emergencies.

Get More Info About Bothell Plumbing Trade Schools

Enroll in the Right Bothell Plumber Training School

Picking the best plumbing training program will probably be the most important decision you will make to start your new trade. As we have discussed in this article, there are several things that you will need to evaluate and compare among the schools you are reviewing. It's a necessity that any plumber training that you are evaluating includes a good deal of hands-on training. Classes should be smaller in size and every student must have their own equipment to train with. Classroom instruction should provide a real-world perspective, and the curriculum should be current and in-line with industry standards. Training programs differ in length and the kind of credential offered, so you will need to ascertain what length of program and credential will best fulfill your needs. Every program offers unique possibilities for certification as well. Probably the best approach to research your short list of schools is to check out each campus and talk with the students and instructors. Invest some time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the program you decide on is the ideal one for you. With the proper training, hard work and dedication, you can become a professional plumber in Bothell WA.