How to Pick the Best Plumber Trade School near Bothell Washington

The initial step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Bothell WA. But with numerous vocational schools to choose from, just how do you undertake making sure that you enroll in the ideal one? Especially since there are so many factors to evaluate. For example, some potential students will begin by looking for schools that are close to their residence. After they have located some that are within driving distance, they will choose the one with the least expensive tuition. While location and cost are important, they are not the only things that must be examined. Also critical are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and other qualifications should influence your final judgment when choosing a plumbing training school. We will discuss that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Bothell WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Bothell WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Bothell WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Bothell WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Technical Schools

When you have decided to obtain a certificate, diploma or degree, you can begin to focus your training options. Because there are numerous plumbing tech and trade schools in the Bothell WA region, it's important to have a checklist of criteria that each school must satisfy. The first two that we talked about were location and tuition expense. And while both qualifiers may be critical when making your selection, there are other variables that must be considered as well. Below is a checklist of those added qualifications that you will need to analyze prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have earned either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Confirm that the Bothell WA school is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you obtain a superior education, it may help in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Additionally, many states mandate that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Washington Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Bothell WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A low completion rate may signify that students were dissatisfied with the program and dropped out. It may also signify that the instructors were not qualified to instruct the students. It's also essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but additionally that it has the network of contacts to assist graduates obtain apprenticeships or employment in the Bothell WA area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Find out if the schools you are comparing have working relationships with local Bothell WA plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by providing hands-on training, but it also supplies job opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Bothell WA plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Bothell WA home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a few of the classes so that you can see how big they are and experience the interaction between students and instructors. Talk to several of the students and get their feedback concerning class sizes and instruction. Last, speak to some of the instructors and learn what their level of experience is in Bothell WA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you are only able to attend classes in the evening or on weekends near Bothell WA, confirm that the programs you are looking at provide those choices. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Finally, ask what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Learn More About Bothell Plumbing Training Schools

Choose the Right Bothell Plumber Trade School

Picking the right plumber training program will undoubtedly be the most critical decision you will make to begin your new career. As we have covered in this article, there are many things that you will need to evaluate and compare between the schools you are reviewing. It's a necessity that any plumbing tech school that you are considering includes a considerable amount of hands-on instruction. Classes need to be small in size and every student must have their personal equipment to train with. Classroom instruction should provide a real-world perspective, and the curriculum should be current and in-line with industry standards. Programs differ in duration and the kind of credential offered, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Each program provides unique possibilities for certification as well. Perhaps the best means to research your short list of schools is to visit each campus and speak with the teachers and students. Take the time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the program you choose is the ideal one for you. With the right training, hard work and dedication, you can become a professional plumber in Bothell WA.