How to Pick the Best Plumbing Tech School near Des Moines Washington

The initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Des Moines WA. But with so many technical schools to pick from, just how do you undertake making certain that you enroll in the right one? Particularly since there are so many points to consider. For example, some students will start by looking for schools that are nearby their residence. Once they have found some that are within driving range, they will choose the one with the lowest tuition. Even though cost and location are significant, they are not the only factors that must be considered. Also important are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and additional qualifiers should influence your final decision when selecting a plumbing trade school. We will address that checklist in more detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the training choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Des Moines WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Des Moines WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Des Moines WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Des Moines WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Training Schools

Once you have decided to earn a diploma, certificate or degree, you can start to refine your school options. Because there are so many plumbing tech and trade schools in the Des Moines WA area, it's imperative to have a checklist of qualifications that each school must satisfy. The first two that we mentioned were location and the cost of tuition. And although both qualifiers may be critical when making your selection, there are other factors that must be considered as well. Following is a checklist of those added qualifications that you will need to analyze before choosing a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have earned either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Confirm that the Des Moines WA school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a quality education, it may help in securing financial aid or student loans, which are in many cases unavailable for non-accredited schools. Also, a number of states mandate that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Washington Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Des Moines WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A low completion rate could indicate that students were unhappy with the program and quit. It could also indicate that the teachers were not qualified to train the students. It's similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the industry, but additionally that it has the network of contacts to assist grads secure apprenticeships or jobs in the Des Moines WA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Check if the schools you are reviewing have referring relationships with local Des Moines WA plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also supplies employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be working with in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be expecting. Otherwise, ask a local Des Moines WA plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school must be within driving distance of your Des Moines WA residence. Remember that if you decide to enroll in an out-of-state school, in addition to moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor some of the classes so that you can observe how big they are and experience the interaction between instructors and students. Speak to a few of the students and get their comments relating to class sizes and instruction. Finally, speak with some of the teachers and find out what their level of experience is in Des Moines WA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Des Moines WA, confirm that the programs you are considering provide those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any due to work, sickness or family responsibilities.

Find Out More About Des Moines Plumbing Training Schools

Choose the Right Des Moines Plumber Trade School

Choosing the right plumbing trade school will probably be the most important decision you will make to launch your new career. As we have covered in this article, there are many factors that you will need to evaluate and compare among the schools you are reviewing. It's a necessity that any plumbing training program that you are assessing includes a considerable amount of hands-on instruction. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the curriculum should be up-to-date and conform with industry standards. Courses differ in length and the type of credential provided, so you will have to decide what length of program and degree or certificate will best fulfill your needs. Every program offers unique options for certification as well. Probably the best approach to research your short list of schools is to go to each campus and talk with the teachers and students. Take the time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the program you decide on is the right one for you. With the proper training, hard work and dedication, you can become a professional plumber in Des Moines WA.