Home >> Washington >> Lake Stevens >> Trade Schools For Plumbers


Get Free Info on Plumbing Schools Lake Stevens WA 98205


How to Find the Best Plumbing Course near Lake Stevens Washington

Lake Stevens Washington plumbing contractor replacing sink faucetThe initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Lake Stevens WA. But with so many technical schools to select from, just how do you tackle making sure that you enroll in the best one? Especially since there are so many points to evaluate. For example, some students will commence by looking for schools that are close to their residence. When they have identified a few that are within driving range, they will decide on the one with the cheapest tuition. Even though cost and location are important, they are not the sole factors that should be examined. Also important are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifiers should help mold your final decision when picking a plumber trade school. We will cover that checklist in more detail later in this post. But first, let's talk a little bit about becoming a plumber and the educational options that are available.

What is a Plumber?

Lake Stevens Washington plumbing contractor repairing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Lake Stevens WA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Lake Stevens WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Lake Stevens WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Lake Stevens WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Technical Schools

Lake Stevens Washington plumbing contractor replacing water heater

When you have made a decision to earn a diploma, certificate or degree, you can start to narrow down your school options. Because there are numerous plumbing trade and vocational schools in the Lake Stevens WA area, it's essential to have a checklist of qualifications that each school must meet. The initial 2 that we discussed were location and the cost of tuition. And while both qualifiers may be critical when making your selection, there are other factors that must be considered also. Below is a checklist of those added qualifiers that you will need to assess before choosing a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have attained either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Make sure that the Lake Stevens WA program is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you get an excellent education, it can assist in obtaining financial assistance or student loans, which are frequently unavailable for non-accredited programs. Additionally, some states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Lake Stevens WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A lower completion rate could indicate that students were dissatisfied with the course and quit. It may also signify that the teachers were not qualified to instruct the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but also that it has the network of contacts to assist grads acquire apprenticeships or jobs in the Lake Stevens WA area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Check if the schools you are reviewing have referring partnerships with local Lake Stevens WA plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Lake Stevens WA plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Lake Stevens WA residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much personalized training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Talk to a few of the students and get their opinions relating to class sizes and instruction. Finally, talk with a few of the teachers and find out what their level of experience is in Lake Stevens WA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Lake Stevens WA, check that the programs you are considering provide those options. If you can only attend part-time, make certain that the school you select offers part-time enrollment. Also, find out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Find Out More About Lake Stevens Plumbing Training Schools

Enroll in the Best Lake Stevens Plumbing Vocational School

Picking the best plumbing training program will undoubtedly be the most important decision you will make to launch your new career. As we have discussed in this article, there are a number of things that you will need to examine and compare among the training programs you are considering. It's a necessity that any plumbing training that you are examining includes a lot of hands-on instruction. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction should provide a real-world perspective, and the course of study should be current and in-line with industry standards. Training programs differ in length and the type of credential provided, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Each program offers different options for certification as well. Perhaps The ideal means to research your short list of schools is to check out each campus and speak with the students and faculty. Take the time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the school you decide on is the right one for you. With the proper training, hard work and commitment, you can become a professional plumber in Lake Stevens WA.