How to Choose the Right Plumbing Training School near Lakewood Washington

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Lakewood WA. But with so many vocational schools to pick from, just how do you undertake making sure that you enroll in the best one? Especially since there are a number of factors to examine. For instance, many students will begin by searching for schools that are close to their residence. When they have found a few that are within driving distance, they will choose the one with the least expensive tuition. While cost and location are important, they are not the only things that should be examined. Also critical are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and other qualifications should contribute toward your ultimate decision when picking a plumbing training school. We will address that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Lakewood WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Lakewood WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Lakewood WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Lakewood WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Vocational Schools

Now that you have decided to obtain a certificate, diploma or degree, you can begin to refine your school options. Since there are numerous plumbing vocational and trade schools in the Lakewood WA area, it's essential to have a checklist of qualifications that each program must meet. The first 2 that we talked about were location and tuition expense. And even though both qualifiers may be crucial when making your determination, there are other variables that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to research prior to enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing trade programs have received either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make certain that the Lakewood WA school is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain an excellent education, it can assist in acquiring financial aid or student loans, which are often unavailable for non-accredited schools. Also, some states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Lakewood WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A lower completion rate may indicate that students were dissatisfied with the course and quit. It could also indicate that the teachers were not qualified to train the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist grads acquire apprenticeships or jobs in the Lakewood WA area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are comparing have referring relationships with local Lakewood WA plumbers or plumbing specialists. An apprenticeship not only offers a valuable experience by furnishing practical training, but it also provides job opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are already in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Lakewood WA plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Lakewood WA home. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on some of the classes so that you can observe how large they are and experience the interaction between students and instructors. Speak with a few of the students and get their opinions relating to class sizes and instruction. Finally, talk with some of the instructors and find out what their level of experience is in Lakewood WA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to attend classes at night or on weekends near Lakewood WA, confirm that the schools you are considering provide those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any due to work, sickness or family issues.

Learn More About Lakewood Plumbing Vocational Schools

Enroll in the Right Lakewood Plumbing Trade School

Picking the best plumber training program will probably be the most critical decision you will make to begin your new trade. As we have discussed in this article, there are many factors that you will need to examine and compare between the schools you are looking at. It's a prerequisite that any plumber training program that you are reviewing includes a considerable amount of hands-on training. Classes should be small in size and each student should have their personal equipment to train with. Classroom teaching should offer a real-world perspective, and the curriculum should be up-to-date and conform with industry standards. Programs differ in length and the kind of credential offered, so you will need to decide what length of program and credential will best satisfy your needs. Each program provides different possibilities for certification also. Probably The ideal way to research your short list of schools is to check out each campus and talk with the faculty and students. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you choose is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Lakewood WA.