How to Find the Right Plumbing Training near Maple Valley Washington

The first step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Maple Valley WA. But with so many technical schools to select from, just how do you tackle making certain that you enroll in the ideal one? Especially since there are so many factors to examine. For example, many potential students will start by looking for schools that are nearby their home. When they have identified some that are within commuting range, they will select the one with the least expensive tuition. Although cost and location are of importance, they are not the only things that must be considered. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and additional qualifiers should help mold your final decision when choosing a plumbing trade school. We will discuss that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Maple Valley WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Maple Valley WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Maple Valley WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Maple Valley WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Technical Schools

When you have made a decision to obtain a certificate, diploma or degree, you can start to refine your school options. Because there are numerous plumbing tech and trade schools in the Maple Valley WA area, it's imperative to have a checklist of criteria that each program must meet. The first two that we talked about were location and the cost of tuition. And although both qualifiers may be crucial when making your decision, there are other variables that must be considered as well. Following is a checklist of those additional qualifiers that you will need to analyze prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  Numerous plumbing vocational programs have acquired either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Verify that the Maple Valley WA program is accredited by a U.S. Department of Education approved accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive an excellent education, it may help in obtaining financial assistance or student loans, which are frequently unavailable for non-accredited schools. Furthermore, some states mandate that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Maple Valley WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A lower completion rate might signify that students were unhappy with the course and dropped out. It might also indicate that the instructors were not competent to instruct the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist students obtain apprenticeships or employment in the Maple Valley WA area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught together with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Check if the schools you are comparing have working relationships with local Maple Valley WA plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also provides employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Maple Valley WA plumbing contracting company if they can give you some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Maple Valley WA home. Take note that if you decide to enroll in an out-of-state school, besides the added relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on some of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Talk to a few of the students and get their comments relating to class sizes and instruction. Last, talk to some of the instructors and learn what their level of experience is in Maple Valley WA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you can only attend classes at night or on weekends near Maple Valley WA, check that the schools you are looking at offer those options. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family responsibilities.

Find Out More About Maple Valley Plumber Vocational Schools

Choose the Right Maple Valley Plumbing Training School

Choosing the ideal plumbing training program will probably be the most critical decision you will make to begin your new profession. As we have covered in this article, there are many factors that you will need to evaluate and compare among the schools you are looking at. It's a necessity that any plumbing training program that you are reviewing includes a considerable amount of hands-on instruction. Classes need to be smaller in size and each student should have their own equipment to train with. Classroom instruction needs to provide a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Programs differ in length and the type of credential offered, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Every training program provides unique options for certification as well. Perhaps the best approach to research your final list of schools is to go to each campus and talk with the faculty and students. Take the time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the program you select is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Maple Valley WA.