How to Select the Right Plumbing Training Course near Olympia Washington

The first step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Olympia WA. But with so many technical schools to choose from, just how do you go about making sure that you enroll in the best one? Particularly since there are a number of factors to evaluate. For instance, many prospective students will begin by searching for schools that are nearby their residence. Once they have found some that are within commuting range, they will choose the one with the least expensive tuition. Although location and cost are of importance, they are not the only qualifications that need to be considered. Also important are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and additional qualifications should influence your final decision when choosing a plumber trade school. We will address that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Olympia WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Olympia WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Olympia WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Olympia WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Tech Schools

Once you have made a decision to earn a diploma, certificate or degree, you can start to focus your school options. Considering that there are numerous plumbing vocational and trade schools in the Olympia WA area, it's important to have a checklist of criteria that each program must satisfy. The initial two that we discussed were location and the cost of tuition. And even though both qualifiers may be crucial when making your decision, there are other factors that need to be considered also. Following is a checklist of those additional qualifications that you will need to analyze prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing technical programs have acquired either a regional or a national accreditation. They can receive Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Verify that the Olympia WA program and school are accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. Along with helping guarantee that you obtain a quality education, it can help in acquiring financial aid or student loans, which are often not available for non-accredited programs. Furthermore, a number of states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Olympia WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A low completion rate might suggest that students were dissatisfied with the program and dropped out. It might also indicate that the instructors were not competent to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist students obtain apprenticeships or jobs in the Olympia WA area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Check if the schools you are reviewing have referring relationships with local Olympia WA plumbers or plumbing specialists. An apprenticeship not only provides a rewarding experience by furnishing practical training, but it also furnishes job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be using on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Olympia WA plumbing contractor if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school must be within driving distance of your Olympia WA residence. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and experience the interaction between instructors and students. Speak to a few of the students and get their comments regarding class sizes and instruction. Finally, speak to some of the teachers and learn what their level of experience is in Olympia WA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you can only go to classes in the evening or on weekends near Olympia WA, verify that the programs you are reviewing provide those options. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Find Out More About Olympia Plumber Trade Schools

Pick the Right Olympia Plumber Trade School

Picking the ideal plumbing trade school will undoubtedly be the most important decision you will make to begin your new profession. As we have discussed in this article, there are several things that you will need to examine and compare among the schools you are looking at. It's a necessity that any plumbing training program that you are evaluating includes a lot of hands-on training. Classes need to be smaller in size and each student should have their personal equipment to train with. Classroom education should provide a real-world perspective, and the curriculum should be current and in-line with industry standards. Training programs differ in length and the kind of credential offered, so you will need to ascertain what length of program and credential will best serve your needs. Each program provides different options for certification also. Probably the best means to research your final list of schools is to visit each campus and talk with the teachers and students. Take the time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the program you select is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Olympia WA.