Home >> Washington >> Seattle >> Plumbing Classes


Get Free Info on Plumbing Training Schools Seattle WA 98101


How to Find the Best Plumbing Training Course near Seattle Washington

Seattle Washington plumber installing kitchen faucetThe initial step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Seattle WA. But with numerous technical schools to choose from, just how do you approach making certain that you enroll in the best one? Particularly since there are a number of points to consider. For instance, many potential students will begin by looking for schools that are nearby their residence. Once they have identified some that are within driving distance, they will select the one with the least expensive tuition. Even though cost and location are of importance, they are not the sole things that need to be considered. Also important are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and additional qualifications should influence your ultimate decision when selecting a plumbing training school. We will talk about that checklist in greater detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Seattle Washington plumbing contractor fixing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Seattle WA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Seattle WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Seattle WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Seattle WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

Seattle Washington plumbing contractor replacing hot water heater

When you have decided to earn a certificate, diploma or degree, you can begin to refine your training options. Considering that there are so many plumbing tech and trade schools in the Seattle WA area, it's important to have a checklist of qualifications that each school must satisfy. The initial 2 that we talked about were location and the cost of tuition. And even though both qualifiers may be critical when making your selection, there are additional variables that need to be considered as well. Below is a checklist of those additional qualifiers that you will need to assess before selecting a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have received either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Confirm that the Seattle WA school is accredited by a U.S. Department of Education recognized accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping guarantee that you acquire an excellent education, it can help in securing financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Also, a number of states require that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Seattle WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A low completion rate could signify that students were disappointed with the program and dropped out. It might also suggest that the instructors were not qualified to train the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the industry, but also that it has the network of contacts to assist students obtain apprenticeships or employment in the Seattle WA area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught together with an apprenticeship or an internship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Ask if the schools you are reviewing have working relationships with local Seattle WA plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by furnishing hands-on training, but it also supplies employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be looking for. If not, ask a local Seattle WA plumbing company if they can provide some tips.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your Seattle WA home. Remember that if you decide to enroll in an out-of-state school, besides the added relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between instructors and students. Talk with a few of the students and get their comments concerning class sizes and instruction. Finally, talk with a few of the instructors and learn what their level of experience is in Seattle WA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Seattle WA, verify that the schools you are reviewing offer those choices. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Seattle Plumbing Training Schools

Pick the Best Seattle Plumbing Vocational School

Choosing the right plumbing training program will undoubtedly be the most important decision you will make to launch your new profession. As we have addressed in this article, there are many things that you will need to assess and compare among the schools you are reviewing. It's a necessity that any plumbing tech school that you are examining includes a lot of hands-on instruction. Classes need to be smaller in size and every student must have their own equipment to train with. Classroom teaching should offer a real-world frame of reference, and the training program should be up-to-date and conform with industry standards. Courses vary in length and the type of credential offered, so you will need to determine what length of program and degree or certificate will best serve your needs. Each program provides unique possibilities for certification also. Probably the best means to research your final list of schools is to check out each campus and talk with the students and faculty. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the best one for you. With the proper training, hard work and dedication, you can become a professional plumber in Seattle WA.