How to Pick the Right Plumber Vocational School near Silverdale Washington

The first step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Silverdale WA. But with so many vocational schools to select from, just how do you tackle making certain that you enroll in the right one? Particularly because there are a number of points to consider. For instance, many prospective students will commence by searching for schools that are close to their residence. After they have found several that are within commuting range, they will choose the one with the cheapest tuition. Even though cost and location are significant, they are not the only qualifications that should be evaluated. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should contribute toward your final decision when picking a plumbing training school. We will cover that checklist in greater detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the educational options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Silverdale WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Silverdale WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Silverdale WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Silverdale WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Technical Schools

Once you have made a decision to earn a diploma, certificate or degree, you can begin to refine your training options. Considering that there are numerous plumbing trade and vocational schools in the Silverdale WA region, it's essential to have a checklist of qualifications that each school must satisfy. The initial two that we mentioned were location and tuition expense. And although both qualifiers may be crucial when making your determination, there are additional variables that need to be considered also. Following is a checklist of those added qualifiers that you will need to assess prior to selecting a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing trade schools have attained either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Make sure that the Silverdale WA school and program are accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. Along with helping make certain that you get a quality education, it can help in acquiring financial aid or student loans, which are in many cases unavailable for non-accredited schools. Also, many states mandate that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Washington Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Silverdale WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate could signify that students were unhappy with the program and dropped out. It could also signify that the instructors were not qualified to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the field, but additionally that it has the network of contacts to assist graduates acquire apprenticeships or jobs in the Silverdale WA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Find out if the schools you are comparing have referring partnerships with local Silverdale WA plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by providing practical training, but it also furnishes job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Silverdale WA plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Silverdale WA home. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized training as possible, which can be difficult in bigger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and experience the interaction between teachers and students. Speak to several of the students and get their comments regarding class sizes and instruction. Last, talk with some of the teachers and find out what their level of experience is in Silverdale WA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you can only go to classes at night or on weekends near Silverdale WA, verify that the programs you are reviewing offer those options. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Find Out More About Silverdale Plumbing Trade Schools

Enroll in the Best Silverdale Plumbing Training School

Selecting the right plumbing training program will probably be the most important decision you will make to start your new trade. As we have covered in this article, there are many things that you will need to assess and compare among the training programs you are looking at. It's a prerequisite that any plumber training that you are considering includes a good deal of hands-on training. Classes should be smaller in size and each student must have their personal equipment to train with. Classroom instruction should provide a real-world context, and the curriculum should be up-to-date and conform with industry standards. Programs differ in duration and the kind of credential provided, so you will have to determine what length of program and credential will best satisfy your needs. Each training program offers different possibilities for certification as well. Perhaps the best means to research your final list of schools is to check out each campus and speak with the students and faculty. Invest some time to monitor some classes. Tour the campus and facilities. Make certain that you are confident that the school you choose is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Silverdale WA.