Home >> Washington >> Spokane Valley >> Plumber Courses


Request Free Info on Plumbing Training Schools Spokane Valley WA 99016


How to Pick the Right Plumber Training School near Spokane Valley Washington

Spokane Valley Washington plumbing contractor fixing kitchen sink faucetThe first step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Spokane Valley WA. But with numerous vocational schools to choose from, just how do you approach making sure that you enroll in the ideal one? Especially since there are a number of points to consider. For example, many students will commence by searching for schools that are close to their residence. After they have located several that are within driving distance, they will pick the one with the least expensive tuition. Although cost and location are significant, they are not the only things that need to be considered. Also important are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and additional qualifications should help mold your final judgment when choosing a plumber trade school. We will address that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training choices that are available.

Becoming a Plumber

Spokane Valley Washington plumbing contractor fixing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Spokane Valley WA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Spokane Valley WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Spokane Valley WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Spokane Valley WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Tech Schools

Spokane Valley Washington plumbing contractor installing water heater

Once you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Considering that there are numerous plumbing tech and trade schools in the Spokane Valley WA area, it's essential to have a checklist of qualifications that each program must meet. The initial two that we talked about were location and the cost of tuition. And while both qualifiers may be important when making your selection, there are other factors that need to be considered also. Following is a checklist of those added qualifications that you will need to assess before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Confirm that the Spokane Valley WA school is accredited by a U.S. Department of Education approved accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive a superior education, it may assist in securing financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Furthermore, a number of states require that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Washington Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Spokane Valley WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate might indicate that students were disappointed with the course and dropped out. It may also mean that the instructors were not qualified to train the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the industry, but also that it has the network of contacts to help graduates acquire apprenticeships or employment in the Spokane Valley WA area.

Are Apprenticeship Programs Sponsored?  Many plumber technical programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational programs will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Check if the schools you are considering have working partnerships with local Spokane Valley WA plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides employment opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Spokane Valley WA plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you can relocate, the school needs to be within driving distance of your Spokane Valley WA residence. Remember that if you decide to attend an out-of-state school, besides the added moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can monitor a couple of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk with a few of the students and get their opinions relating to class sizes and instruction. Finally, talk with some of the teachers and find out what their level of experience is in Spokane Valley WA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near Spokane Valley WA, confirm that the schools you are reviewing offer those choices. If you can only attend part-time, make sure that the school you select permits part-time enrollment. Finally, ask what the protocol is to make-up classes should you miss any due to work, sickness or family issues.

Learn More About Spokane Valley Plumber Training Schools

Choose the Right Spokane Valley Plumbing Trade School

Picking the best plumber training program will undoubtedly be the most important decision you will make to launch your new trade. As we have addressed in this article, there are a number of things that you will need to assess and compare between the training programs you are considering. It's a must that any plumber tech school that you are considering includes a lot of hands-on instruction. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential offered, so you will have to ascertain what length of program and degree or certificate will best fulfill your needs. Each training program offers different possibilities for certification also. Perhaps The ideal approach to research your final list of schools is to check out each campus and speak with the students and instructors. Take the time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you pick is the ideal one for you. With the right training, effort and commitment, you can become a professional plumber in Spokane Valley WA.