How to Choose the Right Plumber Trade School near Tacoma Washington

The initial step to becoming a plumbing contractor or tradesman is finding a plumbing trade school near Tacoma WA. But with numerous vocational schools to pick from, just how do you approach making sure that you enroll in the best one? Particularly because there are so many factors to examine. For instance, some prospective students will commence by searching for schools that are close to their residence. After they have located some that are within commuting range, they will decide on the one with the least expensive tuition. Although cost and location are important, they are not the sole things that need to be considered. Also critical are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and other qualifiers should contribute toward your ultimate decision when choosing a plumbing training school. We will address that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the educational choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Tacoma WA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Tacoma WA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Tacoma WA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Tacoma WA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Tech Schools

Now that you have made a decision to obtain a certificate, diploma or degree, you can start to narrow down your school options. Considering that there are so many plumbing trade and vocational schools in the Tacoma WA area, it's important to have a checklist of criteria that each program must meet. The first 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be crucial when making your selection, there are other variables that need to be considered as well. Following is a checklist of those added qualifiers that you will need to assess before choosing a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have earned either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Verify that the Tacoma WA program is accredited by a U.S. Department of Education approved accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a quality education, it may assist in acquiring financial assistance or student loans, which are in many cases not available for non-accredited programs. Also, a number of states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Washington Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Tacoma WA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A lower completion rate may signify that students were dissatisfied with the course and dropped out. It could also signify that the teachers were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the industry, but also that it has the network of contacts to help students obtain apprenticeships or employment in the Tacoma WA area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught together with an apprenticeship or an internship program. Those participating trade and technical schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Find out if the schools you are considering have referring relationships with local Tacoma WA plumbers or plumbing specialists. An apprenticeship not only provides a rewarding experience by furnishing practical training, but it also furnishes employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. If not, ask a local Tacoma WA plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can relocate, the school must be within driving distance of your Tacoma WA residence. Remember that if you decide to attend an out-of-state school, in addition to moving costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and experience the interaction between students and teachers. Speak with a few of the students and get their opinions concerning class sizes and instruction. Last, talk with a few of the instructors and learn what their level of experience is in Tacoma WA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you are only able to go to classes at night or on weekends near Tacoma WA, confirm that the schools you are considering provide those choices. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Also, ask what the protocol is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About Tacoma Plumbing Vocational Schools

Enroll in the Best Tacoma Plumber Training School

Picking the ideal plumber trade school will probably be the most critical decision you will make to launch your new trade. As we have covered in this article, there are a number of things that you will need to assess and compare among the training programs you are considering. It's a necessity that any plumbing tech school that you are examining includes a lot of hands-on instruction. Classes need to be small in size and every student must have their own equipment to train with. Classroom education should offer a real-world context, and the curriculum should be current and conform with industry standards. Training programs differ in length and the type of credential provided, so you will need to determine what length of program and certificate or degree will best serve your needs. Every program offers different options for certification as well. Probably the best means to research your short list of schools is to go to each campus and speak with the students and instructors. Invest some time to sit in on some classes. Tour the campus and facilities. Make certain that you are confident that the school you pick is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Tacoma WA.