Home >> Wisconsin >> Grand Chute >> Becoming A Plumber


Request Free Info on Plumber Training Courses Grand Chute WI 54911


How to Find the Best Plumber Vocational School near Grand Chute Wisconsin

Grand Chute Wisconsin plumbing contractor replacing kitchen sink faucetThe initial step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near Grand Chute WI. But with numerous technical schools to select from, just how do you undertake making certain that you enroll in the best one? Particularly since there are so many factors to evaluate. For instance, many prospective students will start by searching for schools that are close to their residence. Once they have located several that are within commuting range, they will select the one with the cheapest tuition. Although location and cost are significant, they are not the sole factors that need to be considered. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifiers should influence your final decision when selecting a plumber training school. We will discuss that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the instructional options that are offered.

What is a Plumber?

Grand Chute Wisconsin plumber adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Grand Chute WI plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Grand Chute WI plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Grand Chute WI is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Grand Chute WI to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Tech Schools

Grand Chute Wisconsin plumbing contractor installing hot water heater

When you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your training options. Since there are numerous plumbing vocational and trade schools in the Grand Chute WI area, it's imperative to have a checklist of qualifications that each school must meet. The initial two that we discussed were location and tuition expense. And although both qualifiers may be crucial when making your decision, there are other variables that need to be considered also. Below is a checklist of those added qualifiers that you will need to analyze before selecting a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing trade schools have received either a regional or a national accreditation. They may receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Verify that the Grand Chute WI school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you acquire a quality education, it may help in obtaining financial aid or student loans, which are frequently unavailable for non-accredited programs. Also, a number of states mandate that the plumbing training course be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Wisconsin Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Grand Chute WI schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate could indicate that students were dissatisfied with the course and quit. It could also indicate that the teachers were not qualified to instruct the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the trade, but also that it has the network of contacts to help graduates secure apprenticeships or employment in the Grand Chute WI area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught together with an apprenticeship or an internship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Find out if the schools you are comparing have working partnerships with local Grand Chute WI plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by providing practical training, but it also provides job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be trained on are up-to-date and what you will be working with on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be expecting. Otherwise, ask a local Grand Chute WI plumbing company if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school must be within commuting distance of your Grand Chute WI home. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one instruction as possible, which can be challenging in larger classes. Ask if you can sit in on some of the classes so that you can see how big they are and witness first hand the interaction between instructors and students. Speak to several of the students and get their feedback regarding class sizes and instruction. Finally, talk with some of the teachers and find out what their level of experience is in Grand Chute WI and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near Grand Chute WI, verify that the programs you are looking at provide those choices. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Find Out More About Grand Chute Plumbing Vocational Schools

Choose the Right Grand Chute Plumbing Trade School

Choosing the best plumbing training program will undoubtedly be the most critical decision you will make to launch your new profession. As we have covered in this article, there are a number of factors that you will need to evaluate and compare among the schools you are reviewing. It's a prerequisite that any plumbing training program that you are assessing includes a good deal of hands-on instruction. Classes need to be small in size and each student should have their own equipment to train with. Classroom teaching should offer a real-world perspective, and the curriculum should be current and conform with industry standards. Programs vary in length and the type of credential offered, so you will have to ascertain what length of program and credential will best satisfy your needs. Each training program offers unique options for certification as well. Probably The ideal approach to research your short list of schools is to check out each campus and speak with the students and faculty. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you choose is the right one for you. With the right training, effort and dedication, you can become a professional plumber in Grand Chute WI.