How to Choose the Best Plumber Technical School near Madison Wisconsin

The first step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Madison WI. But with numerous technical schools to select from, just how do you undertake making sure that you enroll in the right one? Especially since there are so many points to evaluate. For instance, some potential students will begin by searching for schools that are close to their residence. When they have located a few that are within commuting distance, they will select the one with the cheapest tuition. While location and cost are important, they are not the only factors that must be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and other qualifiers should influence your final judgment when choosing a plumbing training school. We will discuss that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Madison WI plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Madison WI plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Madison WI is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Madison WI to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Once you have made a decision to earn a certificate, diploma or degree, you can begin to narrow down your school options. Because there are so many plumbing vocational and trade schools in the Madison WI area, it's important to have a checklist of qualifications that each program must meet. The initial 2 that we discussed were location and tuition expense. And even though both qualifiers may be critical when making your selection, there are additional factors that must be taken into account as well. Below is a checklist of those added qualifications that you will need to analyze before selecting a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Verify that the Madison WI school and program are accredited by a U.S. Department of Education recognized accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you get a superior education, it may assist in obtaining financial assistance or student loans, which are in many cases not available for non-accredited schools. Additionally, some states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Wisconsin Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Madison WI schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A lower completion rate might indicate that students were unhappy with the course and quit. It might also indicate that the instructors were not qualified to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the trade, but additionally that it has the network of contacts to assist graduates obtain apprenticeships or employment in the Madison WI area.

Are Apprenticeship Programs Sponsored?  Most plumber trade programs are taught together with an internship or an apprenticeship program. Those participating vocational and trade schools will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Find out if the schools you are reviewing have referring relationships with local Madison WI plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by providing hands-on training, but it also supplies employment opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be looking for. If not, ask a local Madison WI plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can relocate, the school must be within driving distance of your Madison WI home. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized training as possible, which can be difficult in larger classes. Ask if you can monitor a couple of the classes so that you can see how big they are and witness first hand the interaction between students and teachers. Speak to some of the students and get their comments relating to class sizes and instruction. Finally, talk to some of the instructors and find out what their level of experience is in Madison WI and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Madison WI, confirm that the schools you are considering provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Get More Info About Madison Plumber Vocational Schools

Pick the Best Madison Plumbing Trade School

Picking the best plumber training program will undoubtedly be the most important decision you will make to begin your new trade. As we have covered in this article, there are several factors that you will need to assess and compare among the training programs you are reviewing. It's a necessity that any plumbing tech school that you are considering includes a good deal of hands-on instruction. Classes should be smaller in size and every student should have their personal equipment to train with. Classroom education should offer a real-world frame of reference, and the course of study should be current and conform with industry standards. Programs differ in duration and the type of credential offered, so you will need to ascertain what length of program and certificate or degree will best satisfy your needs. Each program offers unique options for certification also. Perhaps The ideal approach to research your final list of schools is to visit each campus and speak with the students and faculty. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the ideal one for you. With the right training, hard work and dedication, you can become a professional plumber in Madison WI.