How to Choose the Right Plumbing Trade School near Dalton Georgia

The first step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Dalton GA. But with so many vocational schools to pick from, just how do you approach making sure that you enroll in the right one? Especially since there are a number of factors to consider. For instance, some potential students will start by looking for schools that are nearby their home. Once they have located some that are within driving distance, they will choose the one with the most affordable tuition. Although location and cost are significant, they are not the sole qualifications that should be considered. Also critical are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifications should help mold your final judgment when choosing a plumber training school. We will address that checklist in more detail later in this post. But first, let's talk a little bit about becoming a plumber and the educational choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Dalton GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Dalton GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Dalton GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Dalton GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Tech Schools

When you have decided to earn a diploma, certificate or degree, you can start to refine your school options. Considering that there are so many plumbing trade and vocational schools in the Dalton GA area, it's important to have a checklist of qualifications that each school must satisfy. The first two that we talked about were location and the cost of tuition. And while both qualifiers may be crucial when making your determination, there are other factors that need to be considered as well. Following is a checklist of those added qualifiers that you will need to analyze before selecting a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have attained either a regional or a national accreditation. They may receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Verify that the Dalton GA program and school are accredited by a U.S. Department of Education acknowledged accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a superior education, it can assist in acquiring financial aid or student loans, which are often unavailable for non-accredited programs. Also, a number of states mandate that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Dalton GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A low completion rate may suggest that students were dissatisfied with the course and dropped out. It may also suggest that the instructors were not qualified to instruct the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to assist students acquire apprenticeships or jobs in the Dalton GA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Check if the schools you are comparing have working relationships with local Dalton GA plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also supplies employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be looking for. Otherwise, ask a local Dalton GA plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Dalton GA residence. Take note that if you decide to attend an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can see how big they are and witness first hand the interaction between students and instructors. Speak with several of the students and get their comments regarding class sizes and instruction. Finally, talk with a few of the instructors and find out what their level of experience is in Dalton GA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you can only attend classes at night or on weekends near Dalton GA, verify that the programs you are looking at provide those options. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Finally, ask what the protocol is to make-up classes should you miss any due to work, sickness or family emergencies.

Learn More About Dalton Plumber Training Schools

Enroll in the Best Dalton Plumbing Vocational School

Selecting the best plumbing trade school will probably be the most critical decision you will make to start your new profession. As we have covered in this article, there are a number of factors that you will need to assess and compare among the training programs you are reviewing. It's a prerequisite that any plumbing training program that you are reviewing includes a considerable amount of hands-on instruction. Classes should be small in size and each student must have their personal equipment to train with. Classroom teaching should provide a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs vary in length and the type of credential offered, so you will have to determine what length of program and degree or certificate will best serve your needs. Every program provides unique options for certification also. Perhaps the best means to research your short list of schools is to visit each campus and talk with the faculty and students. Take the time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you select is the ideal one for you. With the right training, hard work and commitment, you can become a professional plumber in Dalton GA.