How to Enroll in the Best Plumber Training School near Dalton Georgia

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Dalton GA. But with numerous technical schools to select from, just how do you undertake making sure that you enroll in the ideal one? Particularly since there are a number of factors to consider. For instance, many potential students will begin by searching for schools that are close to their home. When they have found some that are within commuting distance, they will pick the one with the most affordable tuition. Even though location and cost are of importance, they are not the only factors that need to be considered. Also important are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifiers should influence your ultimate decision when selecting a plumber trade school. We will talk about that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Dalton GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Dalton GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Dalton GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Dalton GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Tech Schools

Once you have decided to obtain a certificate, diploma or degree, you can begin to refine your school options. Considering that there are so many plumbing tech and trade schools in the Dalton GA region, it's important to have a checklist of criteria that each program must satisfy. The initial two that we talked about were location and tuition expense. And even though both qualifiers may be important when making your determination, there are other variables that need to be taken into account also. Below is a checklist of those added qualifiers that you will need to analyze before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have received either a regional or a national accreditation. They can attain Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Make sure that the Dalton GA program is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you obtain a quality education, it may help in acquiring financial aid or student loans, which are often unavailable for non-accredited schools. Additionally, some states mandate that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Dalton GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate might indicate that students were disappointed with the program and quit. It might also signify that the teachers were not competent to train the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist graduates acquire apprenticeships or jobs in the Dalton GA area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Find out if the schools you are considering have working partnerships with local Dalton GA plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by providing practical training, but it also supplies job opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. If not, ask a local Dalton GA plumbing contractor if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school must be within commuting distance of your Dalton GA home. Take note that if you decide to attend an out-of-state school, in addition to moving costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can monitor a few of the classes so that you can observe how big they are and witness first hand the interaction between teachers and students. Talk to some of the students and get their comments relating to class sizes and instruction. Last, talk with some of the teachers and find out what their level of experience is in Dalton GA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you can only attend classes at night or on weekends near Dalton GA, check that the schools you are reviewing provide those options. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any due to work, illness or family issues.

Get More Info About Dalton Plumber Trade Schools

Pick the Best Dalton Plumbing Trade School

Selecting the ideal plumbing trade school will probably be the most important decision you will make to launch your new career. As we have discussed in this article, there are many factors that you will need to evaluate and compare among the schools you are considering. It's a necessity that any plumber training that you are examining includes a considerable amount of hands-on training. Classes need to be smaller in size and each student must have their personal equipment to train with. Classroom instruction needs to offer a real-world perspective, and the course of study should be up-to-date and conform with industry standards. Training programs vary in length and the type of credential provided, so you will need to decide what length of program and credential will best serve your needs. Each training program offers different possibilities for certification also. Perhaps the best way to research your final list of schools is to go to each campus and speak with the teachers and students. Invest some time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the right one for you. With the right training, hard work and commitment, you can become a professional plumber in Dalton GA.