How to Find the Right Plumber School near Jenks Oklahoma

The first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Jenks OK. But with so many technical schools to choose from, just how do you go about making certain that you enroll in the right one? Especially because there are so many variables to evaluate. For instance, many potential students will begin by searching for schools that are close to their home. After they have found several that are within commuting distance, they will decide on the one with the lowest tuition. Although cost and location are of importance, they are not the only factors that need to be considered. Also critical are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and additional qualifiers should influence your final decision when picking a plumbing training school. We will address that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Jenks OK plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Jenks OK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Jenks OK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Jenks OK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Trade Schools

Once you have decided to earn a certificate, diploma or degree, you can start to refine your school options. Considering that there are numerous plumbing tech and trade schools in the Jenks OK region, it's important to have a checklist of qualifications that each program must satisfy. The first 2 that we talked about were location and tuition expense. And even though both qualifiers may be important when making your determination, there are other variables that need to be taken into account also. Following is a checklist of those additional qualifications that you will need to assess before choosing a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing trade schools have acquired either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Confirm that the Jenks OK school is accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping guarantee that you receive an excellent education, it can assist in acquiring financial aid or student loans, which are frequently unavailable for non-accredited programs. Also, some states require that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Oklahoma Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Jenks OK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate may suggest that students were disappointed with the program and dropped out. It might also suggest that the teachers were not competent to train the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which can produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the field, but also that it has the network of contacts to assist graduates secure apprenticeships or employment in the Jenks OK area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught together with an apprenticeship or an internship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Ask if the schools you are reviewing have working relationships with local Jenks OK plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also provides job opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be expecting. If not, ask a local Jenks OK plumbing contracting company if they can give you some suggestions.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your Jenks OK home. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can monitor some of the classes so that you can see how big they are and witness first hand the interaction between students and teachers. Speak with several of the students and get their comments regarding class sizes and instruction. Last, talk with a few of the instructors and learn what their level of experience is in Jenks OK and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to attend classes in the evening or on weekends near Jenks OK, verify that the schools you are comparing offer those choices. If you can only attend on a part-time basis, make certain that the school you select allows part-time enrollment. Additionally, check out what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.

Learn More About Jenks Plumber Tech Schools

Enroll in the Best Jenks Plumbing Vocational School

Selecting the right plumber training program will undoubtedly be the most critical decision you will make to begin your new profession. As we have covered in this article, there are many things that you will need to evaluate and compare between the schools you are reviewing. It's a necessity that any plumber training that you are examining includes a lot of hands-on training. Classes need to be smaller in size and each student must have their personal equipment to train with. Classroom education needs to offer a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Courses differ in duration and the type of credential provided, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Each program provides different options for certification also. Perhaps The ideal way to research your final list of schools is to visit each campus and speak with the faculty and students. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the school you choose is the ideal one for you. With the proper training, effort and commitment, you can become a professional plumber in Jenks OK.