How to Select the Right Plumbing Course near Jenks Oklahoma

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Jenks OK. But with numerous vocational schools to pick from, just how do you approach making sure that you enroll in the best one? Especially since there are so many factors to consider. For example, some potential students will begin by looking for schools that are close to their home. After they have located a few that are within driving distance, they will select the one with the cheapest tuition. Even though cost and location are important, they are not the only things that must be examined. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifiers should help mold your ultimate judgment when selecting a plumbing trade school. We will address that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the training options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Jenks OK plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Jenks OK plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Jenks OK is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Jenks OK to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Technical Schools

Once you have decided to obtain a certificate, diploma or degree, you can begin to narrow down your training options. Because there are so many plumbing vocational and trade schools in the Jenks OK region, it's essential to have a checklist of qualifications that each program must meet. The first two that we discussed were location and the cost of tuition. And even though both qualifiers may be critical when making your selection, there are other variables that must be considered also. Below is a checklist of those additional qualifications that you will need to assess before enrolling in a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have acquired either a regional or a national accreditation. They can receive Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Confirm that the Jenks OK school and program are accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. Along with helping make certain that you acquire a quality education, it can help in securing financial assistance or student loans, which are often unavailable for non-accredited schools. Additionally, many states require that the plumbing training course be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Oklahoma Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Jenks OK schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A low completion rate may suggest that students were dissatisfied with the course and dropped out. It could also suggest that the teachers were not competent to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist students obtain apprenticeships or jobs in the Jenks OK area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and technical schools will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Check if the schools you are comparing have working relationships with local Jenks OK plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying practical training, but it also supplies job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be expecting. If not, ask a local Jenks OK plumbing contractor if they can give you some tips.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Jenks OK residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized training as possible, which can be challenging in larger classes. Ask if you can monitor a few of the classes so that you can see how large they are and experience the interaction between instructors and students. Talk to some of the students and get their comments regarding class sizes and instruction. Last, talk to a few of the instructors and find out what their level of experience is in Jenks OK and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you can only attend classes at night or on weekends near Jenks OK, check that the schools you are comparing provide those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Get More Info About Jenks Plumbing Trade Schools

Choose the Right Jenks Plumbing Training School

Selecting the right plumber trade school will undoubtedly be the most important decision you will make to start your new profession. As we have addressed in this article, there are several things that you will need to examine and compare among the training programs you are considering. It's a must that any plumbing training program that you are considering includes a considerable amount of hands-on instruction. Classes should be small in size and each student must have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the training program should be current and conform with industry standards. Training programs differ in length and the kind of credential offered, so you will have to decide what length of program and certificate or degree will best fulfill your needs. Every program provides different options for certification also. Perhaps the best way to research your short list of schools is to go to each campus and talk with the students and instructors. Invest some time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the training program you pick is the best one for you. With the proper training, effort and dedication, you can become a professional plumber in Jenks OK.