How to Select the Right Plumber Training near Rapid City South Dakota

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Rapid City SD. But with so many technical schools to choose from, just how do you tackle making certain that you enroll in the best one? Especially because there are a number of factors to consider. For example, some students will begin by looking for schools that are close to their residence. After they have found a few that are within commuting distance, they will select the one with the lowest tuition. Although cost and location are significant, they are not the sole qualifications that should be considered. Also critical are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and other qualifiers should influence your final decision when picking a plumbing trade school. We will address that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training choices that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Rapid City SD plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Rapid City SD plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Rapid City SD is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Rapid City SD to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Training Schools

Once you have made a decision to obtain a certificate, diploma or degree, you can begin to focus your school options. Since there are numerous plumbing tech and trade schools in the Rapid City SD region, it's essential to have a checklist of criteria that each program must satisfy. The initial two that we mentioned were location and the cost of tuition. And although both qualifiers may be crucial when making your determination, there are additional factors that must be considered also. Following is a checklist of those additional qualifications that you will need to assess prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have acquired either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Verify that the Rapid City SD program is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a quality education, it may assist in securing financial aid or student loans, which are often unavailable for non-accredited schools. Also, a number of states mandate that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the South Dakota Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Rapid City SD schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A low completion rate might signify that students were disappointed with the program and dropped out. It could also indicate that the teachers were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the industry, but also that it has the network of contacts to assist grads acquire apprenticeships or jobs in the Rapid City SD area.

Are Apprenticeship Programs Sponsored?  Many plumber technical programs are taught together with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are comparing have working relationships with local Rapid City SD plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by furnishing practical training, but it also supplies job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Rapid City SD plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Rapid City SD residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one training as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between students and teachers. Speak to several of the students and get their opinions relating to class sizes and instruction. Last, talk with a few of the instructors and find out what their level of experience is in Rapid City SD and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Rapid City SD, check that the schools you are looking at provide those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Get More Info About Rapid City Plumbing Vocational Schools

Enroll in the Best Rapid City Plumbing Training School

Selecting the ideal plumber training program will probably be the most critical decision you will make to launch your new trade. As we have addressed in this article, there are a number of things that you will need to evaluate and compare among the schools you are reviewing. It's a prerequisite that any plumber tech school that you are considering includes a considerable amount of hands-on instruction. Classes need to be smaller in size and each student must have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the training program should be current and conform with industry standards. Training programs vary in duration and the type of credential offered, so you will have to decide what length of program and credential will best serve your needs. Every training program offers different possibilities for certification also. Probably The ideal means to research your short list of schools is to visit each campus and speak with the teachers and students. Take the time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you select is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Rapid City SD.