How to Choose the Best Plumber Technical School near Rapid City South Dakota

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Rapid City SD. But with numerous vocational schools to select from, just how do you tackle making sure that you enroll in the right one? Especially since there are so many variables to examine. For instance, many students will start by searching for schools that are close to their residence. After they have found several that are within driving range, they will choose the one with the most affordable tuition. Even though location and cost are of importance, they are not the sole qualifications that should be considered. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should help mold your final decision when selecting a plumber trade school. We will discuss that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the training choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Rapid City SD plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Rapid City SD plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Rapid City SD is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Rapid City SD to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Technical Schools

Now that you have made a decision to earn a diploma, certificate or degree, you can start to refine your training options. Since there are numerous plumbing vocational and trade schools in the Rapid City SD region, it's important to have a checklist of criteria that each program must meet. The initial two that we mentioned were location and the cost of tuition. And although both qualifiers may be critical when making your determination, there are other factors that need to be taken into account as well. Below is a checklist of those added qualifiers that you will need to assess before choosing a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Rapid City SD program and school are accredited by a U.S. Department of Education approved accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive an excellent education, it can help in securing financial assistance or student loans, which are frequently unavailable for non-accredited programs. Furthermore, some states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the South Dakota Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Rapid City SD schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A lower completion rate could signify that students were dissatisfied with the program and quit. It may also indicate that the teachers were not qualified to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist graduates obtain apprenticeships or jobs in the Rapid City SD area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Ask if the schools you are considering have referring relationships with local Rapid City SD plumbers or plumbing professionals. An apprenticeship not only offers a valuable experience by supplying practical training, but it also supplies employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. If not, ask a local Rapid City SD plumbing contracting company if they can provide some suggestions.

Where is the School Located?  Unless you are able to relocate, the school must be within driving distance of your Rapid City SD residence. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on some of the classes so that you can see how big they are and experience the interaction between instructors and students. Talk with a few of the students and get their feedback regarding class sizes and instruction. Last, speak with some of the teachers and find out what their level of experience is in Rapid City SD and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Rapid City SD, verify that the schools you are looking at provide those choices. If you can only attend part-time, make sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, sickness or family issues.

Get More Info About Rapid City Plumber Trade Schools

Pick the Right Rapid City Plumbing Training School

Picking the best plumber training program will probably be the most critical decision you will make to begin your new trade. As we have addressed in this article, there are a number of things that you will need to examine and compare among the schools you are looking at. It's a must that any plumber training program that you are evaluating includes a considerable amount of hands-on instruction. Classes should be smaller in size and each student should have their own equipment to train with. Classroom teaching should offer a real-world frame of reference, and the training program should be current and conform with industry standards. Programs vary in duration and the kind of credential provided, so you will have to decide what length of program and degree or certificate will best satisfy your needs. Every program provides unique options for certification also. Perhaps The ideal means to research your final list of schools is to check out each campus and speak with the students and faculty. Take the time to attend some classes. Inspect the campus and facilities. Make certain that you are confident that the school you decide on is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Rapid City SD.