How to Pick the Right Plumbing Vocational School near San Antonio Texas

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near San Antonio TX. But with so many technical schools to pick from, just how do you undertake making sure that you enroll in the right one? Especially because there are so many variables to consider. For instance, some potential students will start by searching for schools that are close to their home. Once they have identified a few that are within commuting distance, they will choose the one with the lowest tuition. While location and cost are of importance, they are not the sole things that need to be evaluated. Also important are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and additional qualifications should contribute toward your ultimate decision when picking a plumber training school. We will talk about that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local San Antonio TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of San Antonio TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in San Antonio TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near San Antonio TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Vocational Schools

Now that you have decided to obtain a diploma, certificate or degree, you can start to narrow down your school options. Because there are so many plumbing vocational and trade schools in the San Antonio TX area, it's important to have a checklist of criteria that each program must satisfy. The initial 2 that we mentioned were location and tuition expense. And although both qualifiers may be important when making your determination, there are additional variables that need to be taken into account also. Below is a checklist of those added qualifiers that you will need to research before selecting a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing trade programs have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Make sure that the San Antonio TX school is accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it can help in acquiring financial aid or student loans, which are often unavailable for non-accredited programs. Additionally, many states mandate that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of San Antonio TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A lower completion rate may signify that students were unhappy with the program and quit. It may also suggest that the teachers were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist grads obtain apprenticeships or jobs in the San Antonio TX area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught together with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Find out if the schools you are considering have referring relationships with local San Antonio TX plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also supplies job opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. If not, ask a local San Antonio TX plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can relocate, the school needs to be within driving distance of your San Antonio TX residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized training as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can observe how large they are and experience the interaction between students and teachers. Speak to some of the students and get their comments regarding class sizes and instruction. Last, speak with a few of the instructors and find out what their level of experience is in San Antonio TX and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you can only attend classes at night or on weekends near San Antonio TX, check that the programs you are considering provide those choices. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Also, check out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About San Antonio Plumber Training Schools

Pick the Best San Antonio Plumber Trade School

Choosing the ideal plumber trade school will probably be the most critical decision you will make to start your new profession. As we have covered in this article, there are a number of factors that you will need to assess and compare between the training programs you are reviewing. It's a necessity that any plumbing training that you are assessing includes a lot of hands-on training. Classes need to be small in size and each student should have their own equipment to train with. Classroom education should offer a real-world context, and the curriculum should be current and conform with industry standards. Training programs vary in duration and the kind of credential provided, so you will have to decide what length of program and certificate or degree will best serve your needs. Every program offers different possibilities for certification also. Perhaps The ideal means to research your short list of schools is to go to each campus and speak with the students and instructors. Take the time to monitor some classes. Tour the campus and facilities. Make sure that you are confident that the school you pick is the right one for you. With the right training, effort and dedication, you can become a professional plumber in San Antonio TX.