How to Select the Right Plumber Trade School near San Antonio Texas

The initial step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near San Antonio TX. But with numerous technical schools to choose from, just how do you undertake making certain that you enroll in the right one? Especially since there are so many points to examine. For instance, many prospective students will start by searching for schools that are nearby their home. After they have located several that are within commuting distance, they will select the one with the most affordable tuition. While location and cost are of importance, they are not the only qualifications that must be examined. Also important are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and additional qualifications should contribute toward your final decision when selecting a plumber trade school. We will address that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the training options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local San Antonio TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of San Antonio TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in San Antonio TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near San Antonio TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Trade Schools

Now that you have made a decision to earn a certificate, diploma or degree, you can begin to refine your school options. Considering that there are so many plumbing trade and vocational schools in the San Antonio TX region, it's imperative to have a checklist of criteria that each program must meet. The first two that we talked about were location and the cost of tuition. And even though both qualifiers may be critical when making your decision, there are additional variables that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to research before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Make certain that the San Antonio TX program is accredited by a U.S. Department of Education recognized accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive a superior education, it may assist in acquiring financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Furthermore, some states mandate that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of San Antonio TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A lower completion rate might indicate that students were unhappy with the program and quit. It may also indicate that the teachers were not qualified to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the trade, but additionally that it has the network of contacts to help grads acquire apprenticeships or jobs in the San Antonio TX area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught along with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Ask if the schools you are reviewing have working relationships with local San Antonio TX plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also provides job opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be expecting. If not, ask a local San Antonio TX plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your San Antonio TX home. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can observe how big they are and experience the interaction between students and instructors. Speak with some of the students and get their opinions concerning class sizes and instruction. Last, talk to a few of the teachers and find out what their level of experience is in San Antonio TX and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are assessing are flexible enough to fulfill your needs. If you are only able to attend classes in the evening or on weekends near San Antonio TX, check that the schools you are comparing offer those choices. If you can only attend on a part-time basis, make certain that the school you select offers part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About San Antonio Plumber Tech Schools

Choose the Best San Antonio Plumbing Vocational School

Choosing the right plumber training program will probably be the most critical decision you will make to start your new trade. As we have discussed in this article, there are many things that you will need to evaluate and compare among the schools you are looking at. It's a necessity that any plumbing training that you are reviewing includes a considerable amount of hands-on training. Classes should be small in size and each student must have their personal equipment to train with. Classroom instruction should offer a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs differ in length and the type of credential offered, so you will need to decide what length of program and certificate or degree will best serve your needs. Each program provides unique options for certification also. Probably the best way to research your final list of schools is to go to each campus and speak with the teachers and students. Invest some time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the training program you decide on is the ideal one for you. With the right training, effort and dedication, you can become a professional plumber in San Antonio TX.